GEN3 PLSR332 32 Amp 3 Pin Round Plug Top 56 Series Style IP66

Description

Single-phase industrial power, sealed to IP66.

The GEN3 PLSR332 is a 32A single-phase industrial extension plug top with three round pins and a straight body. Its IP66-rated, 56 Series-style design and compression gland make it a rugged, quick-to-terminate plug for high-current outdoor and industrial leads.

Key Features

• 32A single phase, 3 round pins
• 250V AC
• Straight plug top
• IP66 rated — dust-tight and protected against powerful water jets
• Compression gland for quick cable termination
• 56 Series-style, interchangeable with other major brands
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Complies with AS/NZS 3123:2005; orange finish

Add to cart now for rapid dispatch Australia-wide.

Straight, Round-Pin Connection

The PLSR332 is the straight, in-line version of the round-pin 32A plug, sending the cable straight out the back of the plug. It's the simple choice where a straight lead exit suits the installation. For tight spots or surface runs where the cable needs to turn away, the angled PLAR332 is the alternative.

Built for Tough Australian Sites

This plug is IP66 rated, so it is dust-tight and withstands powerful water jets from any direction. The virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper (for lower heat rise) are made to last, with a wide -25°C to +70°C operating range. It is built to AS/NZS 3123:2005, the Australian standard for industrial plugs and socket-outlets.

Fast, Interchangeable Termination

A compression gland makes cable termination quick and secure on site. Because it follows the 56 Series-style format, the PLSR332 mates with 32A single-phase 3-pin round sockets and inlets and is interchangeable with other major brands. Pair it with a matching 32A round extension socket to build a complete industrial lead.

Q: What voltage and current is the GEN3 PLSR332 rated for?
A: It is rated 32A single phase at 250V, with three round pins.

Q: What is the difference between the PLSR332 and the PLAR332?
A: They are the same 32A single-phase round-pin plug, but the PLSR332 is straight (cable exits in-line) and the PLAR332 is angled at 45 degrees.

Q: Is the GEN3 PLSR332 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, and it is built to AS/NZS 3123:2005 for industrial use.