Extension Lead 4 Pin 40 Amp Round Pin Straight CLIPSAL Plug 2m Standard Duty 6mm cable 415V

Description

Full power three phase, minus the neutral pin.

A 4 pin round 40 Amp extension lead pushes 415V three phase power through three actives plus earth to high demand equipment. Two cable grades, 6mm² and 10mm², run from 2m to 60m, with every lead test tagged by our licensed electricians before it ships.

High quality extension lead:

• Extension Lead 4 Pin Round 40 Amp 415V
• 24 month warranty on all products. Warranty does not extend to misuse.
• Please consult with a qualified electrician or engineer about the suitability of this product for your intended purpose.
• All Electrotraders Extension Leads are assembled, tested and tagged in-house by our Licenced Electricians.

Choose your configuration:

• Available in lengths (m): 2, 3, 5, 10, 15, 20, 25, 30, 40, 50, 60 (Note: configurations may not offer all length options due to component availability or electrical characteristics)
• Cable Specifications: cross-sectional area (CSA in mm2), Nominal Sheath Thickness (NST in mm), Max DC Resistance @20°C (MaxR in ohms/KM), Nominal Diameter (NOD in mm), Amperage rating (in accordance with AS/NZS 3008.1.1.2009 Table 14)
  • Standard: CSA 6mm2, NST 2.3mm, MaxR 3.39, NOD 16.9mm, Amps 46
  • Heavy Duty: CSA 10mm2, NST 3.4mm, MaxR 1.95, NOD 23.3mm, Amps 66
  • Extra Heavy Duty: Not Available
• Typically used at events & temporary cabling, fairgrounds, sporting venues, for generators / motors / compressors / construction applications including portable equipment such as concrete cutting.

IMPORTANT: Avoid extra costs and fees of ordering the wrong product. Before you order: confirm the compatibility of the plug and sockets i.e. 4 Pin 32A, 4 Pin 20A, 4 Pin 10A etc. If you aren't sure, contact us, we are happy to help.

Switch Gear:

• All Plugs and Sockets are source from high quality reputable Australian brands, are IP66 rated and are compatible with all leading Australian switch gear.
• Choose from our regular high quality GEN3 plugs and sockets, or upgrade to industry leading Clipsal gear (available on some product options only)

Cable Properties:

• Leads are assembled using Multi Core Rubber Insulated and Sheathed Flexible Power Cable insulated with Ethylene-propylene rubber (EPR) R-EP-90 90 deg C Conductor
• Conductors are Class 5 tinned copper according to AS/NZS 1125,IEC 60228
• H07 Grade Rubber Flex cable has a submersible rating of 200m (suitable for fresh water, salt water, sewage/contaminated water), is UV sunlight / oil / weather resistant and flame retardant to IEC 0332-1-2:2004,EN60332-1-2-2004.
• Outer jacket (black colour) made of Chlorinated Polyethylene, CPE rubber compound
• Rated Voltage 0.6/1kV

Shop online now for fast dispatch Australia-wide.

Engineered for Australian workloads. Heavy draws from generators, motors, compressors and concrete cutting equipment are exactly what this lead is built to feed, and it handles temporary cabling duty at events, fairgrounds and sporting venues just as comfortably. The 4 core H07 grade rubber flex stands up to UV, oil and weather, carries flame retardant and 200m submersible ratings, and terminates in IP66 rated plugs and sockets that keep dust and water jets out.

Standard or Heavy Duty at 40 Amps? Standard 6mm² is rated 46 Amps under AS/NZS 3008.1.1.2009 Table 14, giving clear headroom over the 40 Amp rating for everyday run lengths. Heavy Duty 10mm² lifts capacity to 66 Amps and cuts maximum DC resistance to 1.95 ohms/KM, down from 3.39, and since voltage lost rises with both current and distance, that upgrade earns its keep on 40m to 60m runs under sustained 40 Amp load.

Every lead leaves Brisbane tested and tagged. Assembly happens at our Rochedale QLD workshop, where licensed Australian electricians build, test and tag each lead under a 24 month warranty. We deliver Australia-wide, offer click and collect locally, and take custom length and bulk order enquiries on 1300 017 197.

Q: What is a 4 pin 40 amp extension lead used for?
A: It powers high demand 415V three phase equipment through a 4 pin round 40A plug: construction machinery such as concrete cutters, along with larger generators, motors and compressors, and heavy temporary cabling at events, fairgrounds and sporting venues.

Q: Do I need a neutral for three phase equipment?
A: Equipment designed to run on the three phases alone, such as many three phase motors, uses no neutral, and that is what a 4 pin lead supplies. Check your equipment's plug: 4 pins means no neutral is carried, while a 5 pin plug needs a 5 pin lead with neutral.

Q: Can I get this extension lead with Clipsal plugs and sockets?
A: Yes. Where the Switch Gear option appears, you can step up from the standard GEN3 fittings to Clipsal. Both are IP66 rated and suited to leading Australian switch gear.