Double Pole Quad 4 Gang Power Point GPO Outlet | P4D Transco Powerclip

Description

Four Double Pole Outlets. One Plate. Maximum Power Density.

The Transco Powerclip P4D is a double pole quad power point — four fully switched double pole 240V AC socket outlets in a single wide-format Powerclip plate rated at 10A. All four outlets isolate both active and neutral conductors simultaneously when switched off, delivering the safe isolation standard required for Australian caravan, commercial, and construction installations. Electrical white, sold as a complete unit.

• Transco Powerclip series — double pole quad (4 gang) power point
• Electrical white impact-resistant polycarbonate construction
• 4 x double pole switched 240V AC socket outlets — 10A rated
• Double pole switching on each outlet — isolates active and neutral simultaneously
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W198 mm x L75 mm x D26 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Suits flush and surface mount installations
• Listed in Transco RV Accessories range
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where Four Double Pole Outlets in One Plate Makes the Difference

The P4D answers a specific installation requirement — maximum outlet density with full double pole isolation on every socket, all from a single plate location. Four 10A outlets in one wide-format plate means fewer installation points, less conduit, less cabling, and a cleaner result on any wall. Each outlet independently isolates both the active and neutral conductors when switched off, meeting the double pole requirement that applies across caravans, motorhomes, site sheds, mobile structures, and a wide range of commercial applications under Australian wiring rules.

The wide-format plate measures W198 x L75 x D26mm — significantly wider than a standard double outlet plate to accommodate all four outlet positions. The 84mm fixing centres remain consistent with standard Powerclip hardware, and the 26mm depth keeps the installation profile low against the wall surface. The moulded polycarbonate construction is impact-resistant and durable, consistent with the full Powerclip range in build quality and finish. The rocker switch on each outlet provides clear visual indication of the switched state independently across all four positions.

The P4D fits all general flush mounting brackets and surface mounting flanges available on the Australian market. It is listed in the Transco RV Accessories range — the combination of four double pole outlets in a compact single-plate format makes it well suited to caravan and motorhome installations where multiple appliances need individually switched, safely isolated power from the one location.

Q: Why does the P4D use double pole switching on all four outlets?
A: Double pole switching isolates both the active and neutral conductors simultaneously on each outlet when switched off. This is a mandatory requirement for power points in caravans, motorhomes, and other mobile structures under Australian wiring rules, and is also best practice in commercial and construction applications where appliances need to be safely isolated from the mains supply.

Q: What are the dimensions of the Transco P4D quad power point?
A: The P4D measures W198mm x L75mm x D26mm with 84mm fixing centres. The 198mm width accommodates all four outlet positions in a single plate while maintaining a low 26mm depth profile against the wall surface.

Q: Is the Transco P4D suitable for caravan and RV installations?
A: Yes. The P4D is listed in the Transco RV Accessories range. Its four double pole outlets provide the individually switched, safely isolated power connections required for caravan and motorhome 240V installations under Australian standards.