CTL95-8 95mm Cable 8mm Stud Tinned Copper Tube Crimp Lugs

Description

95mm Cable. 8mm Stud. Tinned Copper. Compression Crimp Lug. Sold Individually.

The CTL95-8 is a 95mm tinned copper tube compression crimp lug with an 8mm stud hole — used to terminate a 95mm² conductor to a bolted connection point such as a terminal block, earth bar, busbar, or equipment stud. Annealed copper barrel with tin electroplated finish. Sold individually.

• CTL95-8 — 95mm Cable, 8mm Stud Tinned Copper Tube Crimp Lug
• Suits 95mm² conductor — 19/2.52 stranding
• 8mm stud hole — suits M8 bolts and studs
• Annealed copper barrel — tin electroplated finish for corrosion resistance
• Compression crimp barrel — single crimp
• For terminating conductor to terminal block, earth bar, busbar, or bolted connection
• Sold individually

View specs and order online — fast dispatch Australia-wide.

Where the CTL95-8 Crimp Lug Is Used

A compression crimp lug terminates a single conductor end to a bolted connection point — the conductor is inserted into the barrel and a compression crimp tool closes the barrel around the conductor, making a permanent, mechanically secure, low-resistance termination. The tongue of the lug is then bolted to the connection point — a terminal block, earth bar, busbar, equipment stud, or similar — using an M8 bolt through the 8mm stud hole.

The CTL95-8 is sized for 95mm² conductor — a very large cable size used in Australian commercial and industrial electrical installations for heavy sub-main feeds, main switchboard incoming cables, large three-phase motor and plant circuits, and major high-current distribution runs. At 95mm², the conductor is in heavy industrial territory — typically single-core cables used for primary distribution, large motor starters, and major sub-mains in commercial buildings, industrial facilities, and large-scale infrastructure. The 8mm stud hole suits M8 hardware — used where a compact connection point is specified despite the very heavy cable cross-section. The tinned copper construction combines the excellent conductivity of annealed copper with a tin electroplated surface that resists oxidation and maintains a clean, low-resistance contact at the bolted joint over the service life of the installation.

Crimp lugs in this range are available across a wide range of cable sizes and stud hole combinations — covering the full range of conductor sizes and connection hardware used in Australian electrical installations.

Q: What is the difference between a crimp lug and a crimp link?
A: A crimp lug (CTL95-8) terminates a single conductor to a bolted connection point — it has one barrel end for the conductor and one tongue with a stud hole for the bolt. A crimp link joins two conductor ends together — it has an open barrel at both ends. Use a crimp lug for conductor-to-terminal connections; use a crimp link for conductor-to-conductor joints.

Q: What stud or bolt size suits the CTL95-8?
A: The CTL95-8 has an 8mm stud hole, suited to M8 bolts and studs — used where a compact connection point is required at a 95mm² termination.

Q: Is the CTL95-8 sold individually or in a bag?
A: The CTL95-8 is sold individually.