CTL95-10 95mm Cable 10mm Stud Tinned Copper Tube Crimp Lugs

Description

95mm Cable. 10mm Stud. Tinned Copper. Compression Crimp Lug. Sold Individually.

The CTL95-10 is a 95mm tinned copper tube compression crimp lug with a 10mm stud hole — used to terminate a 95mm² conductor to a bolted connection point such as a terminal block, earth bar, busbar, or equipment stud. Annealed copper barrel with tin electroplated finish. Sold individually.

• CTL95-10 — 95mm Cable, 10mm Stud Tinned Copper Tube Crimp Lug
• Suits 95mm² conductor — 19/2.52 stranding
• 10mm stud hole — suits M10 bolts and studs
• Annealed copper barrel — tin electroplated finish for corrosion resistance
• Compression crimp barrel — single crimp
• For terminating conductor to terminal block, earth bar, busbar, or bolted connection
• Sold individually

Order online now — fast dispatch Australia-wide.

Where the CTL95-10 Crimp Lug Is Used

A compression crimp lug terminates a single conductor end to a bolted connection point — the conductor is inserted into the barrel and a compression crimp tool closes the barrel around the conductor, making a permanent, mechanically secure, low-resistance termination. The tongue of the lug is then bolted to the connection point — a terminal block, earth bar, busbar, equipment stud, or similar — using an M10 bolt through the 10mm stud hole.

The CTL95-10 is sized for 95mm² conductor — a very large cable size used in Australian commercial and industrial electrical installations for heavy sub-main feeds, main switchboard incoming cables, large three-phase motor and plant circuits, and major high-current distribution runs. At 95mm², the conductor is in heavy industrial territory — typically single-core cables used for primary distribution, large motor starters, and major sub-mains in commercial buildings, industrial facilities, and large-scale infrastructure. The 10mm stud hole suits M10 hardware — used on heavy duty busbars, main earth bars, and industrial equipment terminals where a robust mechanical connection is required. The tinned copper construction combines the excellent conductivity of annealed copper with a tin electroplated surface that resists oxidation and maintains a clean, low-resistance contact at the bolted joint over the service life of the installation.

Crimp lugs in this range are available across a wide range of cable sizes and stud hole combinations — covering the full range of conductor sizes and connection hardware used in Australian electrical installations.

Q: What is the difference between CTL95-8 and CTL95-10?
A: Both are 95mm² tinned copper tube crimp lugs with identical barrel and cable specifications. The only difference is the stud hole — CTL95-8 has an 8mm stud hole (suits M8 bolts) and CTL95-10 has a 10mm stud hole (suits M10 bolts). Select the correct size to match the bolt or stud at the connection point.

Q: What stud or bolt size suits the CTL95-10?
A: The CTL95-10 has a 10mm stud hole, suited to M10 bolts and studs — used on heavy duty busbars, main earth bars, and industrial equipment terminals.

Q: Is the CTL95-10 sold individually or in a bag?
A: The CTL95-10 is sold individually.