Tesla MLIGHT/16 Light Switch Mechanism 16A Engraved

Description

Tesla LIGHTM. Light Switch Mechanism. 16A 250V. White. "LIGHT" Engraved. Latching.

The Tesla LIGHTM is a 16A latching switch mechanism with "LIGHT" engraved on the rocker — designed to clip into Tesla Classic Series and Slimline Series grid plates (SW1PL through SW6PL). The "LIGHT" engraving provides clear, permanent identification of the lighting circuit being switched at the plate, which is useful in multi-gang installations where lighting, fan, and other circuits are combined on the same plate. White bakelite body. Sold individually.

• Tesla — LIGHTM Light Switch Mechanism
• "LIGHT" engraved on rocker — clear circuit identification
• Latching action — press on, press off (not momentary)
• 1 pole, 16A, 250V AC
• Terminal bores: 4.1mm diameter — suits 4 x 1.5mm² or 3 x 2.5mm² cable
• Horizontal and vertical mount
• Compatible with Tesla and Clipsal Brand Grid Plates
• White bakelite body
• Suitable for residential and commercial environments
• Sold individually

View specs and order online — fast dispatch Australia-wide.

About the Tesla LIGHTM Light Switch Mechanism

The Tesla engraved mechanism range provides standard latching switch mechanisms with specific function labels engraved on the rocker face — making it immediately clear which circuit each switch controls without separate labels or markers on the plate. The LIGHTM has "LIGHT" engraved on the rocker, identifying it as the lighting circuit switch. While a standard (unengraved) mechanism performs the same switching function, the LIGHTM is the preferred choice in multi-gang plate installations where several different circuits — lighting, exhaust fan, heat lamp, or other loads — are switched from the same plate and each position needs to be clearly identified for the user.

The LIGHTM is a latching mechanism — it stays in the on position when pressed and returns to off only when pressed again. Standard latching action is the correct switching type for lighting circuits in residential and commercial installations. The LIGHTM clips into any gang position of a compatible Tesla Classic Series or Slimline Series grid plate, and is also compatible with Clipsal brand grid plates. It can be combined with other mechanism types in any gang position — for example, a LIGHTM beside a FANM mechanism on a 2-gang plate for combined lighting and exhaust fan control from one plate, as is common in Australian bathroom and laundry installations.

Q: What is the difference between LIGHTM and a standard switch mechanism?
A: Both are 16A latching mechanisms that operate identically in terms of switching function. The only difference is the "LIGHT" engraving on the rocker face — used to identify the lighting circuit at the plate. Use LIGHTM where the lighting circuit needs to be labelled at the plate; use a standard unengraved mechanism where engraving is not required.

Q: Can the LIGHTM be used for 2-way switching?
A: Yes — the Tesla LIGHTM is suitable for 2-way switching, allowing a lighting circuit to be controlled from two separate switch locations.

Q: Which plates is the LIGHTM compatible with?
A: The LIGHTM is compatible with Tesla and Clipsal brand grid plates — including Tesla Classic Series and Slimline Series plates (SW1PL–SW6PL). It clips into any gang position in these plates the same way as a standard switch mechanism.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.