Tesla GPO2/USB/AC Double Power Point with USB-A and USB-C Charger 10A 240V 3.5A Max White
SKU: tesdoupowusbac2.4a
Product Image Gallery
Product Pricing
$20.40 (ex-GST)
$22.44 (inc-GST)
$22.44
$20.40
Stock and Availability
- ⚫︎ Sold Out - Backorder Available
White double power point combining two 10A switched outlets with USB-A and USB-C charging on one plate. 3.5A total max USB output at 5V DC, protected against overload, short circuit and 3kV surges. Standard bracket mounting, AS approved, 5 year warranty.
Electrotraders USPs
Description
Wall power and USB charging on a single white plate.
The Tesla GPO2/USB/AC pairs a 10A double power point with one USB-A and one USB-C charging port, so everyday devices top up straight from the wall without a plug pack in sight. In classic white, it reads as a standard double GPO while quietly doing the charger's job as well.
Key Features
- Double power point rated 10A, 220-240V AC 50Hz
- Built-in USB-A and USB-C charger ports
- 3.5A combined maximum USB output, 5V DC nominal
- USB circuit protected against overload and short circuit
- 3kV surge protection
- Under 0.1W standby consumption
- Integrated wiring design for standard wall brackets and C clips
- Plate 77H x 115W x 13D mm, 57mm full depth
- Australian Standards approved
- 5 year manufacturer warranty
Order yours online for fast dispatch Australia-wide.
Why It Matters
Every outlet stays available
A charger occupying a wall socket is a small daily annoyance that this GPO removes for good. Phones and earbuds draw from the USB-A or USB-C port, sharing a 3.5A maximum at 5V DC, while both 10A outlets remain open for whatever actually needs mains power. Standby consumption below 0.1W keeps the always-on charging circuit essentially free to run.
Built-in safeguards for connected devices
Fault protection is part of the design rather than an accessory: the USB circuitry shuts down on overload or short circuit, and 3kV surge protection stands between mains spikes and whatever is plugged into the ports. Australian Standards approval and a 5 year manufacturer warranty round out the safety story.
Fits where a standard GPO fits
The integrated wiring layout suits standard wall brackets and C clips, so an electrician can install this in the same mounting as a conventional double power point, in new work or as a retrofit. The white plate measures 77mm high by 115mm wide with a slim 13mm face and 57mm full depth, suiting residential and commercial fit-outs alike. A black version is available as the Tesla GPO2/USB/AC/BLK.
Q: What devices can the Tesla GPO2/USB/AC charge?
A: Anything that charges over USB-A or USB-C at 5V, with the two ports sharing a combined maximum output of 3.5A.
Q: Do the USB ports affect the two power outlets?
A: No. The USB charger runs on its own protected circuit, and both 10A outlets remain fully usable at the same time.
Q: Can this replace my existing double power point?
A: Yes, in most standard installations. It fits standard wall brackets and C clips, and a licensed electrician can fit it in place of a regular double GPO.
Warranty

This product is backed by an extended manufacturer warranty - click here for details.
(tesdoupowusbac2.4a)
Specifications
| Electrical (Power Point) | |
| Configuration | 10A double power point |
| Rated Voltage | 220-240V AC |
| Rated Frequency | 50Hz |
| USB Charger | |
| Ports | 1 x USB-A, 1 x USB-C |
| Total Max Output Current | 3.5A |
| Nominal Output Voltage | 5V DC |
| Protection | Overload, short circuit, 3kV surge |
| Standby Power Consumption | <0.1W |
| Installation & Physical | |
| Wiring | Integrated wiring design |
| Mounting | Fits standard wall brackets / C clips |
| Plate Size | 77H x 115W x 13D mm (57mm full depth) |
| Colour | White (also available in black) |
| Compliance & Warranty | |
| Approvals | Australian Standards approved |
| Warranty | 5 year manufacturer warranty |
| Product Identification | |
| SKU | tesdoupowusbac2.4a |
| MPN | GPO2/USB/AC |
| SKU | tesdoupowusbac2.4a |
| Manfacturer Part Number | GPO2/USB/AC |
| Brand | Tesla |