SE20C 20mm Electrical Conduit Elbow Grey

Description

20mm. Grey PVC. Solid Conduit Elbow. 90 Degree.

The Rylec SE20C is a 20mm grey PVC solid conduit elbow — providing a 90 degree direction change in a 20mm plain rigid PVC conduit run. The solid elbow has two plain sockets, accepting a plain conduit end in each, bonded with conduit cement for a permanent joint. Grey PVC matches the standard above-ground conduit system. Sold individually — minimum order quantity: 3 pieces.

• Rylec — Series "SE" PVC solid conduit elbows
• 20mm — suits 20mm plain rigid PVC conduit
• 90 degree elbow
• Solid elbow — plain sockets both ends, bonded with conduit cement
• Grey PVC construction
• Sold individually — minimum order quantity: 3 pieces

Browse the range online — fast dispatch Australia-wide.

Where the SE20C Solid Conduit Elbow Fits

A solid conduit elbow is a fixed 90 degree direction change fitting for plain rigid PVC conduit — used where a conduit run needs to turn a corner at a right angle and the conduit is bonded permanently into the fitting. The SE20C is the 20mm size, matching the most common conduit diameter used in residential and light commercial above-ground electrical wiring. The solid construction means both ends accept plain conduit for a permanent, cement-bonded joint — once installed, the elbow becomes a fixed part of the conduit system.

The SE20C solid elbow is used in above-ground conduit installations where a right angle change of direction is needed in the conduit run — on walls, at ceiling/wall junctions, and around obstacles. For situations where access to the cable at the elbow point may be required in the future, an inspection elbow (with a removable cover) is the alternative. The SE20C solid elbow is the standard, permanent fitting for the majority of above-ground grey conduit installations where inspection access is not required.

The Rylec SE range covers solid elbows in 20mm (SE20C) and 25mm (SE25C). For very tight spaces, the EL20C and EL25C small elbows are also available in 20mm and 25mm — these have a more compact profile than the SE-series solid elbows.

Q: What is the difference between a solid elbow (SE20C) and a standard bend (SB20C)?
A: A solid elbow and a standard bend both provide a 90 degree direction change. The key difference is in their form and method: a solid elbow has two plain sockets — the conduit is cemented into both ends of the elbow as a fixed fitting. A standard bend is typically a preformed curved section of conduit that is connected into the run with couplings. In practice, both achieve the same 90 degree turn; the elbow is more compact at the joint point.

Q: What is the minimum order quantity for the SE20C?
A: The minimum order quantity is 3 pieces per order.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.