Pro-Vision 24V 480D COB LED Strip Light Single Colour 10m IP20

Description

Dot-free COB strip light in a single fixed colour.

The Pro-Vision 24V 480D COB Strip Light is a 10 metre roll of high-density COB LED tape, available in a single fixed colour temperature: 3000K warm white, 4000K natural white or 6000K cool white. With 480 LEDs per metre in a continuous COB layout, it delivers a smooth, dot-free line of light for cove lighting, under-cabinet runs and architectural detail. It runs on safe 24V DC, is IP20 rated and can be cut every 50mm.

Key Features

• 10 metre roll – single continuous run
• COB (Chip on Board) – smooth dot-free light output
• High density 480 LEDs per metre
• Single fixed colour – 3000K, 4000K or 6000K
• 24V DC low voltage operation
• 12W per metre power draw
• High brightness 1250 lm/m
• CRI >83 for good colour rendering
• 120 degree beam angle
• 8mm width – fits slim profiles
• Cuttable every 50mm
• Power factor ≥0.9
• IP20 rated for indoor use
• Rated lifespan over 50,000 hours
• 3 year replacement warranty

Add to cart for fast dispatch across Australia.

Smooth, Dot-Free COB Lighting

Unlike traditional SMD strip lights where individual LEDs appear as visible dots, COB (Chip on Board) technology packs 480 diodes per metre under a continuous phosphor coating. The result is an even, seamless line of light with no spotting, which matters most in cove lighting, under-shelf runs and anywhere the strip is viewed directly or reflected off a surface.

Choose Your Colour Temperature

This strip is supplied in a single fixed colour temperature rather than an adjustable one, so you select the tone that suits the space: 3000K warm white for relaxed, ambient areas; 4000K natural white for balanced everyday lighting; or 6000K cool white for bright, functional task areas. Being a fixed single colour keeps the wiring simple with no controller required.

Flexible Installation

At just 8mm wide the strip fits into slim aluminium profiles and tight channels, and can be cut to length every 50mm. Running on safe 24V DC at 12W per metre, the 10 metre length gives a long continuous run for larger installations. With an IP20 rating it is designed for dry indoor locations.

Q: Can this strip change colour temperature?
A: No. It is a single fixed colour temperature, chosen at purchase as 3000K warm white, 4000K natural white or 6000K cool white. For an adjustable warm-to-cool strip, a CCT tuneable model is required.

Q: Does this strip light have visible LED dots?
A: No. It uses COB (Chip on Board) technology with 480 LEDs per metre under a continuous coating, producing a smooth dot-free line of light.

Q: Does it include a driver or power supply?
A: No. This is the strip roll only. It requires a 24V DC driver to operate, available separately.