Clipsal 56C540-GY 56 Series Switched Socket Outlet 500V 40A 5 Round Pin IP66 3 Pole Surface Grey

Description

Forty amps of sealed three-phase switching.

The Clipsal 56C540-GY pairs a 40A switch with a five round pin socket behind a polycarbonate cover sealed to IP66. Screw terminals take 10-16 mm² conductors at 500V AC, and the unit fixes straight onto a surface.

Key Features

• 40A rated current at 500V AC 50Hz
• Five round pins, 3P + N + E configuration
• Polycarbonate cover with phosphor bronze pins
• Screw terminals sized for 10-16 mm² conductors
• IP66 protection conforming to AS 60529
• Surface mounting across three modules
• One socket position under a protective cover
• Straight industrial connector, low voltage category
• Ambient range -25 to 75 °C
• 204 mm high, 101 mm wide, 108 mm deep
• Certified to AS/NZS 3133 and AS/NZS 3123
• Grey (GY) finish, Clipsal - 56 Series range
• PVC free, mercury free, Green Premium, 18-month warranty

Order now for fast dispatch anywhere in Australia.

40A Capacity for Bigger Three-Phase Runs

Clipsal rates this catalogue number at 40A on a 500V AC 50Hz supply, delivered through five round pins in a 3P + N + E arrangement. That is the standard Australian and New Zealand three-phase pattern, and Clipsal records the outlet standard as Australian/New Zealand with Australia as the targeted country. Schneider Electric assigns the device application as power supply and names utility, small commercial and industry as the market segments. The item is classified as a socket-outlet in the Series 56 range of product, presenting a single socket position beneath a protective cover. Clipsal records the protection type as without protection. Residual current and overcurrent devices therefore need to sit upstream in the switchboard, since the outlet carries none of its own.

A Polycarbonate Housing Sealed to IP66

The 56C540-GY cover is moulded in polycarbonate. Sealing is rated IP66 conforming to AS 60529, so the enclosure is dust-tight and withstands powerful water jets from every direction. Current-carrying pins are phosphor bronze, and one socket position sits beneath the protective cover. Clipsal states an operating band of -25 to 75 °C. The catalogue number is PVC free and mercury free, holds Green Premium status with Schneider Electric, and its environmental profile is published as ENVPEP2511024EN.

Cable Entry, Size and Mounting

Terminals are the screw type and are specified for conductors from 10 mm² up to 16 mm², so the socket takes heavier submain cable directly without adaptors or reducers. The body measures 204 mm high by 101 mm wide by 108 mm deep, occupies three modules on the mounting surface, fixing directly to a wall or panel with no recess needed, which keeps installation time down on retrofits. Clipsal describes the connection as a straight industrial connector in the low voltage category. Each unit is supplied as one PCE, packed at 20.8 x 10.8 x 11.6 cm and 1204 g in cardboard containing recycled content, and is covered by an 18-month warranty. Clipsal lists the main colour tint as grey, and the socket ships under the Clipsal - 56 Series range in the Grey (GY) finish.

What standards does the Clipsal 56C540-GY comply with?
It is certified to AS/NZS 3133 together with AS/NZS 3123, and carries an IP66 ingress rating under AS 60529. The listed outlet standard is Australian/New Zealand.

What material is the Clipsal 56C540-GY cover made from?
The cover is moulded polycarbonate, and the contact pins are phosphor bronze. The catalogue number is also listed as PVC free and mercury free.

What is the terminal capacity of the Clipsal 56C540-GY?
Its screw terminals accept conductors between 10 mm² and 16 mm², matching the cable sizes a 40A three-phase circuit normally uses.