Hager HMF380T Miniature Circuit Breaker MCB 80A 3 Pole C Curve 10kA 4.5 Module DIN Rail 415V

Description

80A three-phase sub-main protection.

The Hager HMF380T is an 80A three-pole high-current miniature circuit breaker (MCB) with a C tripping curve and 10kA breaking capacity, protecting three-phase sub-mains and heavy distribution circuits from a 4.5-module DIN rail body.

Key Features

• Rated current: 80A, three-phase (3P)
• C tripping curve (5–10x In)
• 10kA breaking capacity (Icn) to IEC 60898-1; Icu 10kA to IEC 60947-2
• Rated voltage 400–415V AC, insulation voltage 500V
• 4.5-module width (80mm) DIN rail mount; 125A frame
• High-capacity terminals: rigid to 70mm², flexible to 50mm²
• Rated impulse withstand voltage 6000V; IP20
• Compliant with AS/NZS 60898.1 and AS/NZS IEC 60947-2

Order today – fast dispatch on Hager circuit protection Australia-wide.

Why it Matters

Three-phase high-current protection on DIN rail.
The HMF380T is an 80A three-pole miniature circuit breaker from Hager's high-current HMF range, protecting all three phases of a circuit against overload and short circuit and tripping automatically when either occurs. At 80A across three poles it is built for three-phase sub-mains and heavy distribution – feeding sub-boards, large machinery and high-demand three-phase loads – while still mounting on standard DIN rail rather than requiring a moulded-case breaker. It is built on a robust 125A frame for headroom on demanding installations.

C curve and genuine cable capacity.
The C tripping characteristic trips on short circuit at 5 to 10 times rated current, the general-purpose curve for mixed resistive and inductive loads including motors. Backed by a 10kA short-circuit breaking capacity to IEC 60898-1 (Icu 10kA to IEC 60947-2), its high-capacity terminals accept rigid conductors up to 70mm² and flexible up to 50mm² per pole at a 3.5 to 5.0Nm torque – matching the heavy cable an 80A three-phase feed runs.

Built for Australian switchboards.
At 4.5 modules (80mm) wide, 90mm high and 70mm deep, the HMF380T mounts on standard 35mm DIN rail. It is compliant with AS/NZS 60898.1 and AS/NZS IEC 60947-2, rated IP20, and operates from -25°C to 70°C to suit main and sub-distribution boards across Australian conditions. With 20.32W total dissipation at full load, plan board ventilation and spacing accordingly and consider an LZ060 heat dissipation insert; MZN130 terminal cover, MZN175 locking kit and MZ auxiliaries are also available.

Q: Is the Hager HMF380T a three-phase breaker?
Yes. It is a 3-pole (3P) MCB that protects all three phases of a 400V circuit; it does not include a separate neutral pole, so a 3P+N model is needed where neutral switching is required.

Q: What cable can the HMF380T terminals take?
Rigid conductors up to 70mm² and flexible up to 50mm² per pole, tightened to between 3.5 and 5.0Nm – sized for an 80A three-phase sub-main.

Q: What does the 10kA rating mean on the HMF380T?
10kA is the rated short-circuit breaking capacity (Icn) to IEC 60898-1 – the maximum fault current the breaker can safely interrupt – with Icu 10kA to IEC 60947-2.