GEN3 CO1PH15 15A Double Pole 3 Pin Flat Switched Socket Outlet IP66 Grey

Description

A 15A double-pole weatherproof socket and switch in one unit.

The GEN3 CO1PH15 double-pole version is a 15A, 3-pin flat switched socket outlet rated 250V and IP66, combining a socket and an integral isolating switch in a single weatherproof unit. Unlike the standard single-pole CO1PH15, the switch on this version breaks both the active and the neutral, fully isolating the outlet at the point of use. At 15A it suits higher-current single-phase equipment than the 10A version. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it suits outdoor, industrial and wash-down environments where a switched, weatherproof outlet with full isolation is needed.

Key Features

• 15A, 3-pin flat switched socket outlet, 250V
• Socket and isolating switch combined in one unit
• Double pole switching – breaks both active and neutral
• Full isolation of the outlet at the point of use
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Flat pin configuration (standard Australian, 15A)
• Series 56 style
• Surface mount
• Combination unit – approximately 206 × 101 × 110mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Australian/NZ approval or compliance certificates held

Add to cart for fast dispatch across Australia.

Double-Pole Full Isolation

This version of the CO1PH15 switches two poles together, breaking both the active and the neutral when turned off. Compared with a single-pole switched socket, which interrupts only the active, double-pole switching fully isolates the connected equipment, a useful safety feature where complete disconnection is required for maintenance or in higher-risk environments.

Single-Pole or Double-Pole?

The standard CO1PH15 is single-pole, switching the active only. This double-pole version switches both active and neutral. Both combine a 15A socket with an integral switch in the same weatherproof housing; the choice comes down to whether full two-pole isolation is needed at the outlet.

Built for the Outdoors

Rated IP66, the CO1PH15 double-pole version is dust-tight and withstands high-pressure water jets. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: What does double-pole mean on this version of the CO1PH15?
A: The switch breaks both the active and the neutral, fully isolating the outlet, whereas a single-pole switch interrupts only the active.

Q: How is this different from the standard CO1PH15?
A: The switching. This version is double-pole (switches active and neutral); the standard CO1PH15 is single-pole (switches the active only). Both are 15A 3-pin flat IP66 switched socket outlets.

Q: Is the CO1PH15 double-pole version suitable for outdoor use?
A: Yes. It is rated IP66, meaning it is dust-tight and protected against high-pressure water jets, suitable for outdoor and wash-down environments.