Double Pole Double Power Point | Deep Mount 10 Amp P2DD Transco

Description

Double Pole Power. Deep Mount. Built for Plaster Wall Installations.

The Transco Powerclip P2DD is a double pole double outlet GPO power point with a deep mounting base — rated at 10A and 240V AC and specifically designed for flush mounting in rendered plaster and masonry walls where a deeper wall recess is required. Two fully switched double pole outlets in electrical white, with 95mm fixing centres to suit plaster brackets. Listed in the Transco RV Accessories range.

• Transco Powerclip series — double pole double outlet power point, deep base
• Electrical white impact-resistant polycarbonate construction
• 2 x double pole switched 240V AC socket outlets — 10A rated
• Double pole switching — isolates both active and neutral on each outlet
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W117 mm x L72 mm x D20 mm
• Fixing centres: 95 mm — suits plaster brackets
• Horizontal wall mounting
• Flush mount only — fits all plaster brackets on the market
• Listed in Transco RV Accessories range
• Also available in single outlet (P1DD), black (P2DD/B), and beige (P2DD/BG)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where the Deep Mount P2DD Is the Correct Specification

The P2DD solves a specific installation challenge — flush mounting a double pole power point in a rendered plaster or masonry wall where the wall recess depth requires a deeper base than the standard P2D provides. The deep base accommodates more cable bulk behind the plate in masonry installations where conduit and cable runs often require additional clearance. The 95mm fixing centres are matched to the plaster bracket format used in these wall types, making the P2DD the correctly specified product where the standard 84mm fixing centre P2D simply will not fit the bracket pattern.

Double pole switching on each outlet means both the active and neutral conductors are isolated when the switch is off — providing safe, compliant isolation on each outlet independently. This meets the double pole standard required across caravans, motorhomes, and a wide range of commercial and fixed appliance installations under Australian wiring rules. The moulded polycarbonate construction is impact-resistant and durable, consistent with the full Powerclip range.

The P2DD is flush mount only — it fits all plaster brackets available on the Australian market but is not compatible with standard surface mounting flanges due to its 95mm fixing centres. For surface mount applications, the standard P2D (84mm fixing centres) is the correct specification. Also available in single outlet (P1DD), black (P2DD/B), and beige (P2DD/BG).

Q: What is the difference between the P2DD and the standard P2D?
A: The P2DD is the deep base variant of the standard P2D double pole double outlet power point. The key differences are the fixing centres — 95mm on the P2DD versus 84mm on the P2D — and the mounting method. The P2DD is designed for flush mounting in plaster brackets in rendered and masonry walls. The standard P2D has 84mm fixing centres and suits both flush mounting brackets and surface mounting flanges.

Q: Can the P2DD be surface mounted?
A: No. The P2DD has 95mm fixing centres and is designed for flush mounting using plaster brackets only. For surface mount installations, the standard P2D (84mm fixing centres) is the correct specification as it suits all general surface mounting flanges available on the Australian market.

Q: Is the Transco P2DD suitable for caravan and RV installations?
A: Yes. The P2DD is listed in the Transco RV Accessories range. Its double pole switching meets the requirement for complete active and neutral isolation in caravan, motorhome, and recreational vehicle 240V installations under Australian standards.