SE25C 25mm Electrical Conduit Elbow Grey

Description

25mm. Grey PVC. Solid Conduit Elbow. 90 Degree.

The Rylec SE25C is a 25mm grey PVC solid conduit elbow — providing a 90 degree direction change in a 25mm plain rigid PVC conduit run. The solid elbow has two plain sockets, accepting a plain conduit end in each, bonded with conduit cement for a permanent joint. Grey PVC matches the standard above-ground conduit system. Sold individually.

• Rylec — Series "SE" PVC solid conduit elbows
• 25mm — suits 25mm plain rigid PVC conduit
• 90 degree elbow
• Solid elbow — plain sockets both ends, bonded with conduit cement
• Grey PVC construction
• Sold individually

Order online now — fast dispatch Australia-wide.

Where the SE25C Solid Conduit Elbow Fits

The SE25C is the 25mm size in the Rylec SE solid conduit elbow range — used where a 25mm above-ground grey rigid PVC conduit run needs a 90 degree direction change at a corner, wall junction, or obstacle. The 25mm conduit size is used where the cable count or cable cross-sections require a bore larger than 20mm — common in sub-circuits with multiple cables, light commercial wiring, and installations where a slightly larger conduit bore improves cable installation ease or conduit fill compliance.

The solid elbow construction means both socket ends accept plain conduit for permanent cement bonding — once installed, the elbow becomes part of the fixed conduit system. For situations where future cable access at the elbow is required, an inspection elbow with a removable cover is the alternative. For very confined spaces, the EL25C small elbow provides a more compact profile than the SE25C in 25mm.

The Rylec SE range covers 20mm (SE20C) and 25mm (SE25C) solid elbows — both grey PVC with plain socket ends for above-ground conduit installations.

Q: What is the difference between the SE25C and the EL25C?
A: Both are 25mm grey PVC 90 degree elbows for above-ground rigid conduit. The SE25C (Solid Elbow) has a standard size profile. The EL25C is a small elbow with a more compact footprint — suited for tighter spaces where the larger SE25C profile doesn't fit. Both are plain socket cement-bonded fittings.

Q: When should I use 25mm conduit and elbow instead of 20mm?
A: Use 25mm conduit and fittings when the cable count or cable cross-sections exceed what a 20mm bore can comfortably accommodate within conduit fill ratio requirements per AS/NZS 3000. Common in multi-cable sub-circuits and light commercial installations.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.