SB12F Transco 12 Way Pole Module Flush Mount Switchboard Load Centre Din Rail MCB RCBO IP

Description

12 Way Flush Mount Switchboard. Lockable. Clean Wall Finish.

The Transco SB12F is a 12 way flush mount lockable switchboard rated up to 100A at 240/415V AC and IP40 — the choice for residential, commercial, and light industrial sub-board installations where the switchboard is recessed into the wall for a clean flush finish rather than surface mounted. UV and fire resistant ABS body, UV resistant transparent lockable polycarbonate lid. 12 DIN rail module positions for MCBs, RCBOs, and standard circuit protection devices. Sold as enclosure only — circuit protection devices sold separately.

• Transco — 12 way flush mount lockable switchboard
• UV and fire resistant ABS body
• UV resistant transparent polycarbonate lid — lockable
• 12 DIN rail module capacity
• Suits MCBs, RCBOs, RCDs, and standard DIN rail mounted devices
• Rated up to 100A at 240/415V AC, 50/60Hz
• On-load current: 100A single phase, 63A three phase
• IP40 ingress protection
• Flush mount — recessed into wall cavity
• Dimensions: L280 mm x W222 mm x H93 mm, Box depth B158 mm
• Standard: IEC60439-3
• Also available in 8, 18, 24, and 36 way flush mount configurations
• Enclosure only — circuit protection devices sold separately

Order online now for fast dispatch Australia-wide.

Where the SB12F Fits — Flush Mount Sub-Board for Residential and Commercial Installations

The SB12F is the flush mount version of the Transco lockable switchboard range — designed to be recessed into the wall cavity so the front face of the switchboard sits flush with the finished wall surface. Twelve DIN rail module positions provide the capacity for a main switch plus up to eleven single-module circuit breakers or RCBOs, or a practical mix of single and double module devices to cover a full residential circuit group. The lockable transparent lid keeps the board secure and accessible to authorised personnel while allowing visual inspection of all device states without opening the enclosure.

The flush mount format is the standard specification for residential switchboards in Australia — the switchboard is recessed into the wall during construction or renovation so it presents a clean, low-profile appearance consistent with the finished wall surface. The B158mm box depth provides the wall cavity requirement for the SB12F — confirm wall depth and cavity dimensions before specifying for a retrofit installation. The L280 x W222mm front face dimensions and IP40 rating suit switchboard rooms, meter cupboards, and indoor electrical panel locations in residential and commercial buildings.

The SB12F is the 12 way option in the Transco flush mount switchboard range. Also available in 8 way (SB08F), 18 way (SB18F), 24 way (SB24F), and 36 way (SB36F). For surface mount applications, the SB surface mount range (SB04–SB36) uses the same lockable lid and ABS construction without requiring a wall cavity. Sold as enclosure only — specify circuit protection devices separately.

Q: What is the difference between the SB12F flush mount and the SB12 surface mount switchboard?
A: The SB12F is designed to be recessed into the wall cavity for a flush finish — it requires a wall cavity of at least 158mm depth (B dimension). The SB12 surface mount mounts directly on the wall surface without requiring a cavity. Both are 12 way, lockable, IP40, and rated to 100A. Choose the SB12F for new installations or renovations where a flush finish is specified, and the SB12 surface mount where no wall cavity is available.

Q: What circuit protection devices are compatible with the Transco SB12F?
A: The SB12F accommodates standard DIN rail mounted circuit protection devices including MCBs, RCBOs, RCDs, and main switches up to 12 module widths total. Devices are sold separately — confirm the module width of each device before ordering to ensure the total does not exceed 12 modules.

Q: What wall cavity depth is required for the Transco SB12F?
A: The SB12F has a box depth (B) of 158mm — the minimum wall cavity depth required for flush mounting. Confirm the available wall depth at the installation location before specifying the SB12F, particularly for retrofit installations in existing walls.