Transco P2WP/15 Neptune Weatherproof Double Power Point 15A IP53 White

Description

15 Amp Weatherproof Power. Double Outlet. Surface Mount Ready.

The Transco P2WP/15 is an IP53 rated weatherproof double outlet power point rated at 15A and 240V AC — the higher-amperage surface mount solution for outdoor, wet area, and exposed installations where two socket outlets are needed and the environment demands more than a standard indoor power point can deliver. White impact-resistant polycarbonate construction, surface mount only, sold as a complete unit.

• Transco Neptune series — IP53 weatherproof double outlet power point
• White impact-resistant polycarbonate construction
• 2 x switched 240V AC socket outlets — 15A rated
• IP53 ingress protection — dust protected, protected against water spray
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W112 mm x D82 mm x H72 mm
• Fixing centres: 95 mm
• Surface mount only
• Horizontal wall mounting
• Also available in 10A (P2WP), single outlet 10A (P1WP), single outlet 15A (P1WP15)
• Compliant with AS/NZS 3100, AS/NZS 3112 and AS/NZS 3133

Order online now for fast dispatch Australia-wide.

Where the P2WP/15 Is the Right Weatherproof Specification

IP53 weatherproof power points are the standard specification for outdoor and wet area locations where the environment involves dust and water spray — undercover alfresco areas, covered outdoor entertaining spaces, garages, carports, commercial kitchens, and any other location where splashing and dust exposure are expected but high-pressure water jets are not. The P2WP/15 delivers two 15A outlets in that specification, making it the right product where higher-draw appliances — outdoor refrigerators, BBQ areas, workshop equipment, and similar — are being powered from a surface-mounted outdoor outlet.

The 15A rating steps up from the standard 10A P2WP for applications where the connected appliances or equipment draw sustained current beyond what a 10A outlet can reliably handle. The surface mount format means no wall cavity is required — the unit mounts directly to the wall surface, making it straightforward to install on brick, masonry, timber, and any other wall type without cutting a recess. The 95mm fixing centres and W112 x D82 x H72mm dimensions should be accounted for when selecting surface mounting hardware.

The P2WP/15 is the 15A double outlet variant in the Transco IP53 weatherproof power point range. Also available in 10A double outlet (P2WP), 10A single outlet (P1WP), and 15A single outlet (P1WP15) for installations where fewer outlets or a lower amp rating is required. All variants share the same IP53 rating, white polycarbonate construction, and surface mount format.

Q: What is the IP53 rating of the Transco P2WP/15?
A: IP53 means the P2WP/15 is dust protected (first digit 5 — no harmful dust ingress) and protected against water spray up to 60 degrees from vertical (second digit 3). This makes it suitable for covered outdoor areas, garages, and wet areas where splashing and dust are expected but high-pressure water jets are not.

Q: What is the difference between the P2WP and the P2WP/15?
A: The P2WP and P2WP/15 are identical in IP rating, construction, dimensions, and fixing centres. The key difference is the current rating — the P2WP is rated at 10A and the P2WP/15 is rated at 15A, making the P2WP/15 suitable for higher-draw appliances and equipment that exceed the standard 10A rating.

Q: Is the Transco P2WP/15 suitable for flush mount installations?
A: No. The P2WP/15 is surface mount only. It mounts directly to the wall surface without requiring a wall recess, making it suitable for brick, masonry, timber, and other wall types where cutting a cavity is not practical or required.