Clipsal 56C532-GY 56 Series Switched Socket Outlet 500V 32A 5 Round Pin IP66 3 Pole Surface Grey

Description

Heavy-duty 32A three-phase switching, IP66 sealed.

Built for the bigger loads, the Clipsal 56C532-GY combines a 32A switch and a five round pin socket in one sealed IP66 housing. Terminals accept conductors up to 16 mm², and the whole assembly bolts to a surface at 500V AC.

Key Features

• 32A rated current at 500V AC 50Hz
• Five round pins wired 3P + N + E
• Screw terminals for 4-16 mm² conductors
• IP66 sealing to AS 60529
• Three module surface-mount body
• Single protective cover over the socket face
• Phosphor bronze pins, ABS moulded cover
• Rated -25 to 75 °C ambient
• Overall 204 x 101 x 108 mm (H x W x D)
• Compliant with AS/NZS 3123 and AS/NZS 3133
• PVC free, mercury free, Green Premium listed
• Grey (GY), 18-month warranty

Grab yours now and get it dispatched fast, Australia-wide.

Rated for Heavier Three-Phase Loads

At 32A the 56C532-GY sits above the light-duty end of the 56 Series socket range. Clipsal specifies 500V AC at 50Hz across a five-pin layout described as 3P + N + E, which is the configuration Australian and New Zealand three-phase equipment expects. Clipsal gives the outlet standard as Australian/New Zealand and certifies the unit against both AS/NZS 3123 and 3133. Schneider Electric lists the device application as power supply and nominates small commercial, industry and utility as the target market segments, with Australia as the targeted country. Each outlet presents one socket position behind a single protective cover, and Clipsal classifies the item as a socket-outlet within the Series 56 range of product.

Sealed Against Dust and Washdown

An IP66 rating to AS 60529 means the housing keeps dust out entirely and shrugs off high-pressure water from any angle. The cover is moulded in ABS, short for acrylonitrile butadiene-styrene, and the pins are phosphor bronze. Clipsal certifies operation from -25 all the way to 75 °C. On the environmental side this catalogue number is PVC free and mercury free, holds Green Premium status with Schneider Electric, and is documented under disclosure ENVPEP2511024EN.

Terminals, Footprint and Fixing

Where the 32A rating really shows is at the terminals: screw connections sized for 4 mm² through to 16 mm² conductors, giving plenty of room for heavier submains. Overall the unit stands 204 mm tall, 101 mm across and 108 mm deep, spanning three modules, and it fixes to the surface with no cavity required. Clipsal describes the connection as a straight industrial connector in the low voltage category. Each socket is supplied as a single PCE unit, packed at 20.65 x 10.35 x 11.35 cm and 1.112 kg, in cardboard made from recycled content, and carries an 18-month warranty. Shipping cartons measure 44.5 x 34.8 x 21.0 cm and weigh 9.1 kg.

What is the pin configuration of the Clipsal 56C532-GY?
It has five round pins arranged as 3P + N + E, meaning three actives, a neutral and an earth, rated 500V AC 50Hz at 32A.

What cable size do the terminals on the Clipsal 56C532-GY take?
The screw terminals are specified for conductors between 4 mm² and 16 mm², which suits the heavier submains and machine feeds a 32A three-phase circuit usually calls for.

Where can the Clipsal 56C532-GY be installed?
Anywhere a surface-mounted IP66 enclosure suits, indoors or out, within an ambient range of -25 to 75 °C. Clipsal targets small commercial, industry and utility applications. Note that it carries no built-in residual current protection, so an upstream RCD is required.