CA20C 20mm Corrugated Conduit Clip Adaptor Fitting PVC

Description

20mm. PVC. Grey. Clip Adaptor for Corrugated Flexible Conduit.

The Rylec CA20C is a 20mm PVC clip adaptor — the standard fitting for terminating 20mm corrugated flexible conduit into enclosures, junction boxes, and conduit entry points. The clip body snaps onto the corrugation of the conduit for a secure mechanical grip, providing a clean, retained conduit termination without requiring a compression nut. Grey PVC construction to match standard grey corrugated conduit. Minimum order quantity: 5 pieces.

• Rylec — Series "CA" PVC clip adaptor for corrugated conduit
• 20mm — suits 20mm corrugated flexible conduit (CC2010C, CC2025C, CC2050C)
• Grey PVC construction
• Clip-type retention — snaps onto conduit corrugations for mechanical grip
• For terminating corrugated conduit into enclosures, junction boxes, and conduit entries
• Sold individually — minimum order quantity: 5 pieces

Order online now — fast dispatch Australia-wide.

Where the CA20C Clip Adaptor Fits

Corrugated flexible conduit needs a fitting at each termination point — whether entering an enclosure, a junction box, a switchboard, or transitioning to a rigid conduit section. The CA20C clip adaptor provides that termination for 20mm corrugated conduit, securing the conduit end at the entry point and preventing the conduit from pulling back through the hole. The clip design grips the corrugated wall of the conduit mechanically, making installation straightforward without requiring a separate compression nut or lock ring.

Every 20mm corrugated conduit run typically needs at minimum two CA20C fittings — one at each end of the run. Longer runs with intermediate junction points or equipment connections require additional fittings. Ordering in multiples of 5 (the minimum order quantity) is practical for most single-job requirements, and keeping a stock of CA20C fittings on hand is standard practice for electricians who regularly work with 20mm corrugated conduit. The CA20C is compatible with all Rylec 20mm grey corrugated conduit (CC2010C, CC2025C, CC2050C) and equivalent 20mm corrugated conduit from other manufacturers.

The CA25C clip adaptor is also available separately for 25mm corrugated conduit.

Q: What is the difference between the CA20C clip adaptor and the SG20C screwed gland?
A: Both terminate 20mm corrugated conduit at an entry point. The CA20C uses a clip mechanism that snaps onto the conduit corrugations — quick to fit, no separate nut required. The SG20C screwed gland uses a threaded compression-style entry that threads into the enclosure or adaptor — providing a more secure weatherproof termination. Choose the CA20C for standard indoor terminations and the SG20C where a sealed or threaded entry is required.

Q: What is the minimum order quantity for the CA20C?
A: The minimum order quantity is 5 pieces per order.

Q: Is the CA20C compatible with all brands of 20mm corrugated conduit?
A: The CA20C is designed for 20mm corrugated flexible conduit and is compatible with Rylec CC20 series conduit and equivalent 20mm corrugated conduit to AS/NZS 61386 from other manufacturers. Confirm the conduit nominal diameter before ordering.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.