Clipsal C2032VA-WE 2 Gang Vertical Light Switch 10A 250V White Electric

Description

Two switches, one plate, standard Australian wall box.

The Clipsal C2032VA-WE is a 2 gang flush light switch in the Classic C2000 range, finished in White Electric. It fits a standard vertical wall-box footprint and combines two independent single-pole rocker mechanisms on one moulded cover plate for two-way or one-way lighting control.

Key Features

• 2 gang single-pole rocker light switch on a single vertical plate
• Rated 10A resistive / 8AX inductive (fluorescent lamp) at 250V AC 50Hz
• 1 or 2 way switching with convenient loop terminal
• Screw terminal connections for solid or stranded copper cable
• Glossy White Electric moulded cover plate on grid plate
• Complete assembly - cover plate, grid, and mechanisms included
• Fixes with 2 supplied screws to a standard wall box
• Built to AS/NZS 60669.1 for domestic and commercial wall switches

Buy Online today.

Why it Matters

The Australian residential workhorse
The Clipsal C2000 range has become the default choice on Australian construction sites and rewires for good reason. Consistent grid dimensions across the range mean electricians can swap between single-gang architrave switches, multi-gang standard switches, GPOs, and dimmers without re-cutting the wall opening or changing the mounting screws. The C2032VA-WE handles the two-switch case where a single mechanism is not enough.

Rated for real household loads
The 10A resistive rating covers standard incandescent, halogen, and LED downlight circuits without derating. The 8AX inductive rating is the specific one to check when driving fluorescent tube lighting, magnetic transformer downlights, or ceiling fans, because the inrush current from these loads is what stresses switch contacts over decades of daily use. AS/NZS 60669.1 sets the endurance requirements the mechanism has to pass.

Loop terminal saves a junction box
The included loop terminal lets the active supply be linked directly through the switch to the next fitting downstream instead of joining wires in a separate junction box behind the plaster. That means faster rough-in, tidier terminations, and fewer failure points inside the wall.

Q: What loads can 10A / 8AX handle?
The 10A rating suits general lighting circuits including incandescent, halogen, and LED. The 8AX rating covers inductive loads such as fluorescent tubes, ceiling fans, and downlights with magnetic transformers, where inrush current is higher than steady-state current.

Q: Can this be wired as a two-way switch?
Yes. Each of the two rocker mechanisms accepts a two-way connection at the terminals, so the switch can be used at either end of a two-way lighting arrangement such as a stairwell or a hallway controlled from both ends.

Q: What size wall box does C2032VA-WE fit?
It fits a standard Australian single-gang wall-box footprint, and the two switches share that footprint on one vertically oriented cover plate. Fixing is by the 2 supplied screws to a compatible mounting block or plaster bracket.