Clipsal 2031VA-WE Series 2000 1 Gang Light Switch | 10A 250V, Reversible

Description

The everyday switch that does the job properly.

The Clipsal 2031VA-WE is a complete Series 2000 1 gang light switch in White Electric – a 10A, 250V AC flush-mount rocker switch supplied as a full assembly with cover plate, grid, and mechanism ready to wire.

Key Features

• Complete switch – cover plate, grid, and mechanism all included
• 1 gang, 1-pole rocker switch rated 10A at 250V AC (8AX for fluorescent lamp loads)
• Reversible plate – mounts vertically or horizontally
• Flush wall mounting, fixed by screws
• Grid accepts the full range of Clipsal 30 Series mechanisms – dimmers, fan controllers, home theatre, audio, and push buttons
• Glossy White Electric finish to match the Series 2000 range

Order today and have it on the van for the next job.

Why it Matters

One Switch, Two Orientations
The plate is reversible, so the same part covers both vertical and horizontal mounting. That means one line item on the order instead of two, and no wrong-orientation surprises when a plate comes out of the box on site.

Upgradeable Down the Track
Because the grid takes any Clipsal 30 Series mechanism, this switch is not a dead end. The rocker can be swapped later for a dimmer, a fan controller, or a push button without touching the plate or the wiring – useful when a room’s requirements change after the fitout.

Rated for the Work
At 10A, 250V AC (8AX with fluorescent lamp loads), this is a standard-duty switch suited to general lighting circuits in domestic and commercial installations, with a screw-fixed flush mount for a solid, flat finish against the wall.

Does the 2031VA-WE come as a complete switch?
Yes. It ships as a full assembly – cover plate, grid, and switch mechanism – ready to wire and mount. This is not a cover-only or plate-only product.

Can it be mounted vertically and horizontally?
Yes. The plate is reversible, so a single part suits either mounting orientation.

Can I replace the switch mechanism later?
Yes. The grid is compatible with the full range of Clipsal 30 Series mechanisms, including dimmers, fan controllers, home theatre and audio mechanisms, and push buttons – so the function can be changed without replacing the plate.