Clipsal 2032VA-WE Series 2000 2 Gang Light Switch | 10A 250V Vertical

Description

Two circuits, one switchplate.

The Clipsal 2032VA-WE is a complete Series 2000 2 gang flush switch in White Electric – a 10A, 250V AC rocker switch supplied as a full assembly with cover plate, grid, and mechanisms, ready to wire in vertical orientation.

Key Features

• Complete switch – cover plate, grid, and mechanisms all included
• 2 gang, 1-pole rocker switch rated 10A at 250V AC
• Vertical format, flush wall mounting, fixed by screws
• Impact-resistant gridplate protects the switches against occasional excessive force
• Polycarbonate construction, 81g
• 18-month manufacturer warranty

Order today while stock lasts.

Why it Matters

Two Circuits from One Position
A 2 gang switch controls two separate lighting circuits from a single wall plate – the standard fit for a room with a main light and a second load, without cutting a second wall box. Clipsal describes it as suited to living areas and commercial settings alike.

Built to Take a Knock
The 2000 Series uses impact-resistant gridplates, so the switch mechanisms stay protected if the plate cops the occasional excessive force – the sort of thing that happens in hallways, garages, and busy commercial corridors.

A Familiar, Long-Serving Range
The 2000 Series has been a mainstay of Australian installations for decades, which makes it the natural like-for-like choice when adding to or repairing an existing 2000 Series board of switches rather than mixing ranges on the one wall.

Does the 2032VA-WE come as a complete switch?
Yes. It ships as a full assembly – cover plate, grid, and switch mechanisms – ready to wire and mount. This is not a cover-only or plate-only product.

What orientation is this switch?
The 2032VA is the vertical format. Clipsal lists the horizontal equivalent under a separate part number (2032HA).

What is it rated to?
It is rated 10A at 250V AC, with 1-pole switch function across both gangs.