Clipsal 56L3-GY 56 Series IP66 Enclosure Lid 3 Gang Grey with Gasket

Description

Seal a three-gang run of your 56 Series enclosure to full IP66.

The Clipsal 56L3-GY is a 3-gang polycarbonate lid with an integrated gasket, built to close off three adjoining gangs of a 56 Series enclosure in one piece and lock out dust and water where the enclosure would otherwise sit open. It's the simple, purpose-made way to weatherproof unused gangs on an industrial installation.

Key Features

• Three-gang (3 gang) enclosure lid for the Clipsal 56 Series
• Supplied with gasket for a sealed, weatherproof closure
• IP66 degree of protection conforming to AS 60529
• Grey (RAL 7035) polycarbonate construction
• Surface / wall-mounted, matched to 56 Series covers
• Dimensions: 95 mm x 288 mm x 28 mm
• Built to AS 3100

Add to cart to weatherproof your 56 Series enclosure.

Why it Matters

One lid, three gangs sealed
Rather than fitting three single-gang lids side by side, the 56L3-GY closes a three-gang run with a single gasket line. That means one continuous seal instead of three joins, keeping the IP66 rating solid across the whole span.

Australian industrial standard
Manufactured to AS 3100 with IP66 protection to AS 60529, the 56L3-GY suits the harsh outdoor and industrial conditions the 56 Series is specified for across Australian sites.

Tough polycarbonate build
The polycarbonate housing gives this larger lid extra rigidity and impact resistance over its span, standing up to the same demanding environments as the rest of the 56 Series range.

Does the 56L3-GY come with a gasket?
Yes. The gasket is included, giving you a sealed IP66 closure straight out of the pack with no extra parts to source.

What size is the Clipsal 56L3-GY lid?
It measures 95 mm wide by 288 mm high with a depth of 28 mm, matched to a three-gang span of the 56 Series.

What IP rating does the 56L3-GY have?
It provides IP66 protection conforming to AS 60529, making it suitable for dust-tight and powerful-water-jet environments when correctly installed.