QIXING QX1475 Panel Mount Angle Socket 3 Pin 16A IEC 60309 IP67

Description

An angled panel socket for single-phase supply.

The QIXING QX1475 is a CEE Form panel mounted angle socket rated 3 pin, 16A, 230V single phase, with an IP67 weatherproof rating. It mounts flush behind a panel cutout via its square flange, with the connector set at a 20° angle rather than facing straight out, making it easier to plug in and unplug where space in front of the panel is limited. These are European-standard industrial connectors conforming to EN/IEC 60309-2, used wherever a robust, weatherproof, panel-mounted connection point is required.

Key Features

• Panel mounting via square flange – 20° angled outlet
• 3 pin – single phase (active, neutral, earth)
• 16A rated current
• 230V
• IP67 – protected against dust and temporary immersion
• 6H clock position
• Compact 73.5 × 64 mm flange
• Conforms to EN/IEC 60309-2

Order now for fast dispatch across Australia.

What a Panel Mount Angle Socket Does

A panel mounted angle socket is built into a flat surface like a straight panel socket – the body passes through a cutout and the square flange bolts to the panel face – but the socket is set at an angle rather than facing straight out. The angled outlet makes it easier to insert and withdraw a plug where there is limited clearance in front of the panel, and helps a connected cable hang naturally. The QX1475 is the entry 16A single-phase version, used for lighter single-phase loads connected at a fixed point.

Single Phase, Weatherproof

Rated 16A and 230V, the QX1475 handles single-phase connections at a fixed panel position. Rated IP67, it is protected against dust and the effects of temporary immersion in water, making it suitable for outdoor, wash-down and demanding industrial locations. As an IEC 60309-2 connector it follows the international pin-and-sleeve standard, so it mates reliably with other IEC 60309 equipment of the same rating and configuration.

Keyed for Safety

The 6h clock position refers to the keyed position of the earth contact under IEC 60309, which corresponds to the standard single-phase voltage band. This keying helps ensure the socket only connects with a matching plug of the correct voltage rating and configuration.

Q: What is the QX1475 used for?
A: It is a flush panel-mounting industrial socket with a 20° angled outlet, built into distribution boards, equipment enclosures and power panels where front clearance is limited. The QX1475 is the 3 pin 16A single-phase version.

Q: How does it mount?
A: The body passes through a cutout in the panel and the square flange bolts to the panel face. The socket sits at a 20° angle, and conductor connections are made at the rear.

Q: What does IP67 mean for this socket?
A: IP67 means it is fully protected against dust and can withstand temporary immersion in water, suiting outdoor and wash-down environments.