QIXING QX1003 CEE Form 3 Pin 16A Appliance Inlet IEC 60309 IP67

Description

A weatherproof industrial inlet for equipment power.

The QIXING QX1003 is a CEE Form appliance inlet rated 3 pin, 16A, 230V single phase, with an IP67 weatherproof rating. It is a surface-mounted IEC 60309-2 inlet – the connector fixed to a piece of equipment or an enclosure so that a matching CEE Form lead or connector can be plugged in to supply power. These are European-standard industrial connectors conforming to EN/IEC 60309-2, widely used wherever a robust, weatherproof power connection is needed. The 6h clock position keys the connector to the standard single-phase voltage band, helping prevent connection to an incompatible supply.

Key Features

• CEE Form appliance inlet (surface mount)
• 3 pin – single phase (active, neutral, earth)
• 16A rated current
• 230V
• IP67 – protected against dust and temporary immersion
• Conforms to EN/IEC 60309-2
• 6h clock position
• M25 cable gland entry
• Approximately 129 × 78 × 95mm (H × W × D); flange 64 × 88mm
• Robust industrial construction for demanding environments

Shop now for fast dispatch across Australia.

What an Appliance Inlet Does

An appliance inlet is the male connector mounted onto a piece of equipment, allowing a matching CEE Form lead or extension socket to be plugged in and supply power. The QX1003 is the surface-mount version, fixing to the outside of an enclosure or chassis. A panel-mount version is also available where a flush-mounted inlet is preferred.

Built for Industrial Environments

Rated IP67, the QX1003 is protected against dust and the effects of temporary immersion in water, making it suitable for outdoor, wash-down and demanding industrial locations. As an IEC 60309-2 connector it follows the international pin-and-sleeve standard, so it interconnects reliably with other IEC 60309 equipment of the same rating and configuration.

Keyed for Safety

The 6h clock position refers to the keyed position of the earth contact under IEC 60309, which corresponds to the standard single-phase voltage band. This keying helps ensure the inlet only connects with a matching lead of the correct voltage rating and configuration.

Q: What is a CEE Form appliance inlet used for?
A: It is the male connector fixed to a piece of equipment so a matching CEE Form lead or socket can plug in to supply power. The QX1003 is the surface-mount, 3 pin 16A version.

Q: What does IP67 mean for this inlet?
A: IP67 means it is fully protected against dust and can withstand temporary immersion in water, suiting outdoor and wash-down environments.

Q: Is the QX1003 single phase or three phase?
A: It is single phase. The 3 pin configuration is active, neutral and earth at 230V. The 4 pin and 5 pin versions in the range are three phase.