QIXING QX1107 CEE Form 3 Pin 63A Appliance Inlet IEC 60309 IP67

Description

A high-current weatherproof industrial inlet.

The QIXING QX1107 is a CEE Form appliance inlet rated 3 pin, 63A, 230V single phase, with an IP67 weatherproof rating. It is a surface-mounted IEC 60309-2 inlet – the connector fixed to a piece of equipment or an enclosure so that a matching CEE Form lead or connector can be plugged in to supply power. These are European-standard industrial connectors conforming to EN/IEC 60309-2, used wherever a robust, weatherproof, high-current power connection is required. The 6h clock position keys the connector to the standard single-phase voltage band, helping prevent connection to an incompatible supply.

Key Features

• CEE Form appliance inlet (surface mount)
• 3 pin – single phase (active, neutral, earth)
• 63A rated current
• 230V
• IP67 – protected against dust and temporary immersion
• Conforms to EN/IEC 60309-2
• 6h clock position
• M40 cable gland entry
• Robust industrial construction for high-current applications

Buy now for fast dispatch across Australia.

What an Appliance Inlet Does

An appliance inlet is the male connector mounted onto a piece of equipment, allowing a matching CEE Form lead or extension socket to be plugged in and supply power. The QX1107 is the 63A surface-mount version, fixing to the outside of an enclosure or chassis. A panel-mount version is also available where a flush-mounted inlet is preferred.

Built for High-Current Industrial Use

Rated 63A and IP67, the QX1107 is built for higher-current connections in demanding environments, protected against dust and the effects of temporary immersion in water. As an IEC 60309-2 connector it follows the international pin-and-sleeve standard, so it interconnects reliably with other IEC 60309 equipment of the same rating and configuration. The M40 cable gland accommodates the larger conductors typical of 63A circuits.

Keyed for Safety

The 6h clock position refers to the keyed position of the earth contact under IEC 60309, which corresponds to the standard single-phase voltage band. This keying helps ensure the inlet only connects with a matching lead of the correct voltage rating and configuration.

Q: What is the QX1107 appliance inlet used for?
A: It is the male connector fixed to a piece of equipment so a matching CEE Form lead or socket can plug in to supply power. The QX1107 is the surface-mount, 3 pin 63A version.

Q: What does IP67 mean for this inlet?
A: IP67 means it is fully protected against dust and can withstand temporary immersion in water, suiting outdoor and wash-down environments.

Q: Is the QX1107 single phase or three phase?
A: It is single phase. The 3 pin configuration is active, neutral and earth at 230V. The 4 pin and 5 pin 63A versions in the range are three phase.