P2WS Transco Slim Weatherproof Flush Fit White Lid Double Power Point 10A IP 66/54

Description

IP65 Weatherproof Power. Slimline. Single Pole. Award Winning.

The Transco Neptune P2WS is an IP65 rated slim weatherproof single pole double outlet power point with neon indicators — rated at 10A and 240V AC. Using the same patented inlet membrane technology and Australian Good Design Award winning design as the Neptune range, the P2WS achieves IP65 ingress protection without a plug inserted and without requiring a lid, in a standard Powerclip plate format. Electrical white, sold as a complete unit.

• Transco Neptune series — IP65 slim weatherproof single pole power point
• Electrical white UV-stabilised impact-resistant polycarbonate
• 2 x single pole switched 240V AC socket outlets — 10A rated
• IP65 without plug inserted — IP54 with plug inserted
• IP65 achieved without a lid — no hinged cover required
• Patented inlet membrane technology — polychloroprene gasket
• Neon power indicator on each outlet
• Single pole switching on each outlet
• Rocker switch on each outlet
• Integrated lid cover included
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W72 mm x L117 mm x D20 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Flush mount — fits all general brackets on the market
• Surface mount — fits all general mounting flanges on the market
• UV stabilised — rated -20°C to +50°C
• Australian Good Design Award winner
• Also available in 15A (P2WS15)
• AU/NZ Approval: N25697
• Compliant with AS/NZS 3100, AS/NZS 3112, AS/NZS 3133 and AS 60529

Order online now for fast dispatch Australia-wide.

Why the Transco Neptune P2WS Belongs in Every Wet Area and Outdoor Installation

The P2WS brings award-winning Neptune IP65 weatherproofing to the standard single pole double outlet format — the most common power point specification in Australian residential and commercial installations. The same patented polychloroprene inlet membrane technology that earned the Neptune range its Australian Good Design Award seals each socket against water ingress at the point of entry, achieving IP65 without any lid and maintaining IP54 with a plug inserted. No bulky enclosure, no hinged cover to leave open and lose the rating — just a slimline 20mm deep plate that looks like any other power point on the wall, but is rated for outdoor and wet area use.

At W72 x L117 x D20mm, the P2WS fits the standard Powerclip plate footprint — meaning it installs into any standard Australian wall box, fits all general flush mounting brackets, and suits all general mounting flanges. This is a significant practical advantage over the double pole P2DWS (H86 x L130 x D32mm), which requires a dedicated surface mounting flange. The P2WS can be surface mounted with the same MF16, MF20, or MB flanges used across the rest of the Powerclip range. The neon power indicators on each outlet provide built-in fault identification — no neon in on mode means a supply side fault, neon on with no appliance means an appliance fault.

The P2WS is single pole — for installations requiring double pole isolation (caravans, motorhomes, mobile structures), the P2DWS is the correct specification. For residential and commercial wet area applications such as bathrooms, alfresco areas, balconies, outdoor entertaining spaces, and commercial kitchens where single pole switching is compliant, the P2WS is the right product — delivering IP65 protection in a slim, familiar format at a fraction of the cost and bulk of traditional garden-style weatherproof power points.

Q: What is the difference between the P2WS and the P2DWS?
A: The P2WS is single pole and the P2DWS is double pole — the primary and critical difference. Both use the same patented Neptune IP65 membrane technology and both have neon indicators. The P2WS is the right specification for residential and commercial wet area installations where single pole switching is compliant. The P2DWS is required where double pole isolation is mandated — caravans, motorhomes, and mobile structures under Australian wiring rules.

Q: Is the Transco Neptune P2WS really IP65 without a lid?
A: Yes. The P2WS achieves IP65 without plugs inserted and without any lid, tested per AS 60529 by an ILAC MRA accredited laboratory in Australia. The patented polychloroprene inlet membrane provides the ingress protection at the socket entry point. With a plug inserted, the rating is IP54. A lid is included and can be used for additional protection or aesthetic preference.

Q: Can the Transco P2WS be surface mounted with a standard mounting flange?
A: Yes. Unlike the P2DWS which requires a dedicated Transco MF/P2DWS mounting flange, the P2WS fits all general mounting flanges on the Australian market — including the standard MF16, MF20, and MB range — due to its standard W72 x L117mm Powerclip plate footprint.