P2WS/C Transco Slim Weatherproof Flush Fit Clear Lid Double Power Point 10A IP 66/54

Description

IP66 Weatherproof Power. Slimline. Single Pole. Clear Lid. Award Winning.

The Transco Neptune P2WS/C is an IP66 rated slim weatherproof single pole double outlet power point with neon indicators and a clear lid — rated at 10A and 240V AC. The /C variant achieves IP66 ingress protection (one rating above the standard P2WS), using the same patented inlet membrane technology and Australian Good Design Award winning design as the Neptune range — without a plug inserted, and without requiring a lid to be closed to maintain the rating. The clear lid allows visual inspection of the outlet status and neon indicators without opening. Electrical clear, sold as a complete unit.

• Transco Neptune series — IP66 slim weatherproof single pole power point with clear lid
• Electrical clear UV-stabilised impact-resistant polycarbonate
• 2 x single pole switched 240V AC socket outlets — 10A rated
• IP66 without plug inserted — IP54 with plug inserted
• IP66 achieved without lid closed — no hinged cover required to maintain rating
• Clear lid — visual inspection of outlet status and neon indicators without opening
• Patented inlet membrane technology — polychloroprene gasket
• Neon power indicator on each outlet
• Single pole switching on each outlet
• Rocker switch on each outlet
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: W72mm x L117mm x D20mm
• Fixing centres: 84mm
• Horizontal wall mounting
• Flush mount — fits all general brackets on the market
• Surface mount — fits all general mounting flanges on the market
• UV stabilised — rated -20°C to +50°C
• The only self-enclosed flush fit double power point in the Australian and New Zealand market
• Australian Good Design Award winner
• AU/NZ Approval: N25697
• Compliant with AS/NZS 3100, AS/NZS 3112, AS/NZS 3133 and AS 60529

Order online now for fast dispatch Australia-wide.

Why the Transco Neptune P2WS/C Belongs in Every Wet Area and Outdoor Installation

The P2WS/C brings award-winning Neptune IP66 weatherproofing to the standard single pole double outlet format — the most common power point specification in Australian residential and commercial installations. The same patented polychloroprene inlet membrane technology that earned the Neptune range its Australian Good Design Award seals each socket against water ingress at the point of entry, achieving IP66 without any lid and maintaining IP54 with a plug inserted. The /C clear lid variant achieves IP66 — one step above the standard P2WS IP65 rating — with the additional practical benefit that the neon indicators and outlet status can be visually checked through the clear lid without opening it.

At W72 x L117 x D20mm, the P2WS/C fits the standard Powerclip plate footprint — meaning it installs into any standard Australian wall box, fits all general flush mounting brackets, and suits all general mounting flanges including the standard MF16, MF20, and MB range. It is the only self-enclosed flush fit double power point in the Australian and New Zealand market, achieving full IP66 protection in a slimline form factor without the bulk of traditional enclosure-based weatherproof power points.

The P2WS/C is single pole — for installations requiring double pole isolation (caravans, motorhomes, mobile structures), the P2DWS is the correct specification. For residential and commercial wet area applications such as bathrooms, alfresco areas, balconies, outdoor entertaining spaces, and commercial kitchens where single pole switching is compliant and an IP66 rating is preferred, the P2WS/C is the right product.

Q: What is the difference between the P2WS/C and the standard P2WS (white)?
A: The P2WS/C is the clear variant — it has a clear polycarbonate body and lid, and achieves IP66 (vs IP65 for the white P2WS). The clear lid allows visual inspection of the neon indicators and outlet status without opening. All other electrical specifications — 10A, 240V, single pole, neon, patented membrane — are identical between the two variants.

Q: Is the Transco Neptune P2WS/C really IP66 without a lid?
A: Yes. The P2WS/C achieves IP66 without plugs inserted and without the lid being closed, tested per AS 60529 by an ILAC MRA accredited laboratory in Australia. The patented polychloroprene inlet membrane provides the ingress protection at the socket entry point. With a plug inserted, the rating is IP54.

Q: Can the Transco P2WS/C be surface mounted with a standard mounting flange?
A: Yes. The P2WS/C fits all general mounting flanges on the Australian market — including the standard MF16, MF20, and MB range — due to its standard W72 x L117mm Powerclip plate footprint. No dedicated flange is required.