P2DWS/B Transco Weatherproof Power Point Double Pole 10 Amp GPO IP65 - Black

Description

IP65 Weatherproof Power. Slimline. Double Pole. Finished in Black.

The Transco Neptune P2DWS/B is an IP65 rated slim weatherproof double pole double outlet power point with neon indicators in black — rated at 10A and 240V AC. It is the only flush mounted, hingeless, self-enclosed slimline weatherproof IP65 double pole neon indicator power point ever made, now in a bold contemporary black finish. Winner of the Australian Good Design Award, the P2DWS/B uses patented inlet membrane technology to achieve IP65 ingress protection without a plug inserted and without requiring a lid. Sold as a complete unit.

• Transco Neptune series — IP65 slim weatherproof double pole power point
• Black UV-stabilised impact-resistant polycarbonate
• 2 x double pole switched 240V AC socket outlets — 10A rated
• IP65 without plug inserted — IP54 with plug inserted
• IP65 achieved without a lid — no hinged cover required
• Patented inlet membrane technology — polychloroprene gasket
• Neon power indicator on each outlet
• Double pole switching — isolates both active and neutral on each outlet
• Rocker switch on each outlet
• Integrated lid cover included
• 3-pin flat earth configuration (active, neutral, earth)
• Single phase AC, 240V, 50Hz
• Copper ferrule cable connector x3
• Accommodates cable up to 2.5mm x 3
• Dimensions: H86 mm x L130 mm x D32 mm
• Fixing centres: 84 mm
• Horizontal wall mounting
• Flush mount — fits all general brackets on the market
• Surface mount — fits Transco MF/P2DWS mounting flange only
• UV stabilised — rated -20°C to +50°C
• Australian Good Design Award winner
• Listed in Transco RV Accessories range
• Also available in white (P2DWS) and 15A variants
• AU/NZ Approval: N25697
• Compliant with AS/NZS 3100, AS/NZS 3112, AS/NZS 3133 and AS 60529

Order online now for fast dispatch Australia-wide.

Why the Transco Neptune P2DWS/B Is in a Class of Its Own

The P2DWS/B brings the full capability of the award-winning Neptune P2DWS to a black finish — delivering IP65 weatherproof double pole power in a slimline format that looks as good as it performs. Traditional outdoor power points are bulky, deep, and rely on a hinged lid to achieve their IP rating — the lid has to be closed for the rating to apply, which means the rating drops the moment a plug is inserted. The Neptune P2DWS/B achieves IP65 without a plug inserted and maintains IP54 with a plug inserted, all without any lid covering the outlets. The patented polychloroprene inlet membrane seals each socket against water ingress at the point of entry — the innovation that earned this product the Australian Good Design Award.

The black finish makes the P2DWS/B the natural specification for contemporary dark-finish installations — commercial kitchens, hospitality venues, alfresco entertaining areas, modern caravan and motorhome fit-outs, and any location where a black power point is specified alongside black switches and plates. The double pole switching on each outlet provides the active and neutral isolation required for mobile and dynamic structures under Australian wiring rules. The neon power indicators on each outlet are a practical fault-finding tool built directly into the power point — no neon in on mode means a supply side fault, neon on with no appliance running means an appliance fault.

At just D32mm deep, the P2DWS/B has a quarter of the depth profile of a traditional garden-style weatherproof power point. The UV-stabilised polycarbonate handles outdoor exposure across a -20°C to +50°C operating range. Surface mounting requires the Transco MF/P2DWS dedicated mounting flange — standard surface mounting flanges are not compatible with this product.

Q: Is the Transco Neptune P2DWS/B really IP65 without a lid?
A: Yes. The P2DWS/B achieves IP65 without plugs inserted and without any lid, tested per AS 60529 by an ILAC MRA accredited laboratory in Australia. The patented polychloroprene inlet membrane provides the ingress protection at the socket entry point. With a plug inserted, the rating is IP54. A lid is included and can be used for additional protection or aesthetic preference.

Q: What mounting flange is required for surface mounting the Transco P2DWS/B?
A: The P2DWS/B is only compatible with the Transco MF/P2DWS dedicated surface mounting flange for surface mount installations. Standard universal surface mounting flanges (MF16, MF20, MB) are not compatible due to the P2DWS/B's unique housing dimensions and fixing pattern. For flush mounting, it fits all general brackets on the market.

Q: Is the Transco Neptune P2DWS/B suitable for caravan and RV installations?
A: Yes. The P2DWS/B is listed in the Transco RV Accessories range. Its double pole switching meets the isolation requirement for mobile structures under Australian wiring rules, and the IP65 rating without a plug inserted makes it suitable for both internal and external installation on caravans, motorhomes, food trucks, and site sheds.