Clipsal 56SW350-GY IP66 Surface Switch 1G 3P 500VAC 50A Grey

Description

Heavy-duty isolation, built to handle 50A without flinching.

When you need a surface-mounted switch that can safely isolate high-current 3-phase circuits in tough outdoor or industrial conditions, the Clipsal 56SW350-GY delivers. Rated to 500VAC and 50A with an IP66 enclosure, it's engineered for reliable ON/OFF control in weather-exposed and dust-heavy environments where a standard indoor switch simply won't hold up.

• 1 Gang, 3 Pole rotary switch
• Rated 500VAC 50Hz, 50A
• IP66 rated to AS 60529
• Complies with AS/NZS 3133
• Polycarbonate housing, Grey finish
• Surface mount, screw fixing, 10-25mm terminal capacity
• Operating range: -25°C to 75°C
• Net weight 0.74kg

Order now for fast Australian dispatch.

Why it Matters

Reliable isolation for demanding sites
A 3-pole rotary switch rated to 500VAC and 50A gives electricians a dependable isolation point for heavier 3-phase loads. The rotary action gives clear, positive ON/OFF operation with visible switching, which is exactly what's needed when isolating equipment for maintenance or safety lockout. Behind the switch face, the mechanism carries a rated short-circuit making capacity of 2.1kA and a breaking capacity of 50kA, so it's built to handle genuine fault conditions safely rather than just routine switching duty.

Built for the outdoors
IP66 protection means this switch is sealed against dust ingress and powerful water jets, making it well suited to sites where equipment sits outside or in wash-down areas. The polycarbonate enclosure resists the knocks and general wear that come with surface-mounted industrial hardware, and screw fixing keeps installation straightforward for a tradesperson working from a standard toolkit. At 107mm high, 101mm wide and 108mm deep, it mounts cleanly to a wall or panel without needing a recessed cavity.

Wide operating tolerance
Rated for use across a -25°C to 75°C range, this switch is built to keep functioning through Australian summers and cold-climate installations alike, without needing special handling. A 10-25mm terminal capacity also gives some flexibility on cable sizing when wiring into heavier-gauge 3-phase circuits, and at 0.74kg it's light enough to handle on a ladder or in a tight access panel.

Q: Is the Clipsal 56SW350-GY suitable for outdoor use?
A: Yes, it carries an IP66 rating, meaning it's protected against dust and powerful water jets, making it suitable for outdoor and wash-down environments.

Q: What voltage and current is this switch rated for?
A: The 56SW350-GY is rated to 500VAC at 50Hz, with a 50A current rating, suited to heavier 3-phase circuits.

Q: How many poles does this switch have?
A: It's a 3 pole switch in a 1 gang configuration, controlled by a single rotary knob.