Clipsal 56 Series 56SW432-GY Surface Switch 1 Gang 4 Pole 500VAC 32A IP66 Grey

Description

Heavy-duty 4-pole isolation, built for the weather.

The Clipsal 56SW432-GY is a surface-mount rotary isolating switch rated to 500VAC and 32A. Its IP66-rated polycarbonate enclosure stands up to dust, water and harsh outdoor conditions where reliable, visible disconnection is essential.

Key Features

• 1 gang, 4 pole configuration
• Rated 500VAC, 32A, 50Hz
• IP66 weatherproof protection
• Rotary knob operation, ON-OFF marking
• Polycarbonate construction, grey finish
• Suitable for isolation duty
• Padlockable rotary handle (2 padlocks, 8-8mm)
• Rated impulse withstand voltage 4kV
• Motor rating M180 at 500V (AS3133)
• Operating range -25 to 75°C
• Made to AS/NZS 3133

Order today for fast dispatch Australia-wide.

Why it Matters

Isolation you can trust
A 4-pole switch breaks all three phases plus neutral in a single action, giving complete isolation for three-phase equipment. That matters wherever machinery must be positively de-energised before servicing. The rotary knob gives a clear, unambiguous ON-OFF position, and the padlockable handle accepts two padlocks so the switch can be locked out during maintenance. With a rated short-circuit making capacity of 1.7kA and a short-time withstand current of 0.8kA for one second, it is built to handle the electrical stresses of an industrial supply.

Built for tough environments
The IP66 rating means the enclosure is fully protected against dust ingress and powerful water jets, so it holds up in exposed outdoor locations, washdown areas and dusty sites. The polycarbonate body resists impact and performs reliably across an ambient operating range of -25 to 75°C. Surface mounting with screw fixing makes installation straightforward on walls, posts and plant, and screw terminal connections keep wiring secure under vibration.

Compliance and confidence
Manufactured to AS/NZS 3133, this switch meets the Australian standard for switches used in industrial and commercial installations. It carries a motor rating of M180 at 500V, a rated impulse withstand voltage of 4kV, and a breaking capacity of 32kA. Backed by Clipsal engineering, it is a dependable choice for electricians and facility teams who need certainty on site.

Is the Clipsal 56SW432-GY suitable for three-phase circuits?
Yes. Its 4-pole design is rated 500VAC and switches all four poles simultaneously, making it suitable for three-phase four-wire isolation up to 32A.

What IP rating does this switch have?
It is rated IP66, providing protection against dust and high-pressure water jets for use in exposed and washdown areas.

Can the switch be padlocked in the off position?
Yes. The rotary handle accepts two padlocks of 8-8mm to secure it for lock-out during servicing.