Clipsal 56SW232-GY 56 Series Surface Switch IP66 - 1 Gang 2 Pole 32A 500VAC - Grey

Description

Heavy-duty 32A isolation for demanding Aussie sites.

The Clipsal 56 Series 56SW232-GY steps up to 32A rotary isolation in a rugged IP66 surface enclosure. Grey polycarbonate housing and a proven 2-pole mechanism suit motor circuits, pumps, compressors and general industrial loads that demand secure isolation for maintenance.

Key Features

• 1 gang, 2 pole rotary isolator switch
• Rated 32A at 250VAC per pole, up to 500VAC
• Motor rating M180 at 250V (AS/NZS 3133)
• Breaking capacity 32 kA
• IP66 weatherproof enclosure
• Compliant with AS/NZS 3133
• Rated impulse withstand voltage 4kV
• Rated short-circuit making capacity 1kA
• ON-OFF marking on surface
• Grey polycarbonate (PC) housing
• Ambient operating range -25 to 75 degrees C
• Surface mount, screw connection, 0.8 N.m torque
• Padlockable rotary handle (2 padlocks, 8mm shackle)
• PVC free, mercury free, Green Premium status
• 18 month manufacturer warranty

Shop Now for fast dispatch Australia-wide.

Why it Matters

Serious current handling for real motor loads
The 32A rating combined with an M180 motor classification under AS/NZS 3133 makes the 56SW232-GY a proper isolator for larger motor circuits, not just general lighting or small appliances. That capacity, together with the 32 kA breaking capacity, gives installers headroom for pumps, workshop equipment, compressors and similar single-phase or two-line loads.

Weatherproof rotary isolation with lock-out
The IP66 rating means the enclosure resists dust ingress and powerful water jets from any direction. The rotary knob is easy to grip with gloved hands and gives clear ON-OFF marking on the surface, so operators can confirm switch position at a glance. A padlockable handle accepts up to two 8mm padlocks, supporting lock-out, tag-out procedures on plant and equipment. UV-stable polycarbonate handles Australian sun without going brittle or fading.

Built for AS/NZS 3000 site compliance
Two-pole switching breaks both active and neutral in a single action, giving full circuit isolation when the panel or equipment downstream needs work. The wide -25 to 75 degrees C operating range covers Australian environments from cold southern job sites to hot northern industrial areas. Screw terminals at 0.8 N.m torque make termination straightforward for licensed electricians.

Q: What is the maximum voltage rating for the 56SW232-GY?
A: The switch is rated 250V AC per pole and suitable for use up to 500V AC across poles in a 2-pole configuration.

Q: Can this switch isolate a 32A motor circuit?
A: Yes. It carries a Motor M180 rating at 250V under AS/NZS 3133, covering the specified motor loads within its 32A current rating.

Q: Can the rotary handle be locked out for maintenance?
A: Yes. The handle accepts up to two padlocks with an 8mm shackle diameter for lock-out, tag-out procedures.