SL2-3CS 3mm Fork Spade Terminal Blue 1.5-2.5mm² — Pack of 25

Description

SL2-3CS. 3mm Stud. Fork Spade Terminal. Blue. 1.5–2.5mm². 27A. 630V. Pack of 25.

The SL2-3CS is a 3mm stud insulated fork spade terminal — used to crimp onto 1.5–2.5mm² conductors and connect to M3 screws, studs, and terminal blocks. 3.2mm stud hole, 5.7mm fork width. Copper contact with tin plating and PVC insulation. Blue insulated collar. 27A current rating. 630V rated. Conforms to RoHS. Pack of 25.

• SL2-3CS — 3mm Fork Spade Terminal, Blue, 1.5–2.5mm²
• Wire size: 1.5–2.5mm² (16–14 AWG)
• Current rating: 27A
• Stud hole (d2): 3.2mm — suits M3 screws and studs
• Fork width (B): 5.7mm
• Fork length (F): 6.5mm
• Total length (L): 21.5mm
• Barrel O.D. (D): 5.3mm
• Barrel I.D. (d): 2.3mm
• Colour: Blue — standard 1.5–2.5mm² colour code
• Contact material: Copper — tin plated
• Insulation: PVC
• Voltage rating: 630V
• Operating temperature: -20°C to +105°C
• Compliance: RoHS
• Applied with standard ratchet crimping tool
• Pack of 25

Order online now — fast dispatch Australia-wide.

About Fork Spade Terminals

A fork spade terminal (also called a spade terminal, fork terminal, or U-terminal) is a crimped wire end terminal with a U-shaped fork that slides onto a screw or stud terminal — allowing the terminal to be connected and disconnected without fully removing the screw. This makes fork spade terminals particularly suited to terminal blocks, DIN rail terminals, equipment screw terminals, and any application where the conductor needs to be connected securely under a screw head.

The SL2-3CS has a 3.2mm stud hole — suited to M3 screws and studs, the smallest common stud size used in terminal blocks and equipment terminals. Tin-plated copper contact provides good conductivity and corrosion resistance. Blue is the standard colour code for the 1.5–2.5mm² wire size range. The insulated PVC collar covers the barrel to protect the crimped connection point.

The SL2 range covers 1.5–2.5mm² conductors in stud sizes from 3mm through 6mm — select the stud size that matches the terminal block or equipment screw being used. Conforms to RoHS and is supplied by Pacific Components.

Q: What wire size does the SL2-3CS suit?
A: The SL2-3CS suits 1.5–2.5mm² conductors (16–14 AWG).

Q: What stud or screw size does the SL2-3CS suit?
A: The SL2-3CS has a 3.2mm stud hole — suited to M3 screws and studs.

Q: What is the current rating of the SL2-3CS?
A: The SL2-3CS is rated at 27A.

Q: What tool is required to crimp the SL2-3CS?
A: A standard ratchet crimping tool is required — with a die set suitable for insulated terminals in the 1.5–2.5mm² range.

Q: How many terminals are in a pack?
A: The SL2-3CS is sold in a pack of 25 terminals.