NCG16A M16 Nylon Cable Gland IP68 Black — 5-10mm Cable

Description

NCG16A. M16. Nylon Cable Gland. IP68. Black. 5–10mm Cable Range. Submersible to 50m.

The NCG16A is an M16 premium nylon cable gland — used to seal cables entering enclosures, junction boxes, and panels through a 16mm hole. Cable range 5–10mm. IP68 rated — submersible to 50 metres. Nylon PA66 body with EPDM rubber seal. Halogen free, low smoke, UV resistant. Compliant with RoHS, CE, IEC, REACH, and IEC 60529. Sold individually.

• NCG16A — M16 Nylon Cable Gland, Black, IP68
• Thread size: M16 × 1.5mm pitch
• Panel hole size: 16mm
• Cable range: 5–10mm outer diameter
• Thread length: 14.8mm
• Locknut included — point to point: 24mm, flat to flat: 22mm
• Body material: Nylon PA66 — halogen free, low smoke, UV resistant
• Seal material: EPDM rubber
• Colour: Black
• IP rating: IP68 — submersible to 50 metres
• Operating temperature: -40°C to +105°C
• Compliance: RoHS, CE, IEC, REACH, IEC 60529
• Suits enclosures, junction boxes, control panels, switchboards
• Sold individually

Buy online now — fast dispatch Australia-wide.

About Premium Nylon Cable Glands

A cable gland (also called a cable fitting or cable connector) is a threaded fitting used to secure and seal a cable as it enters an enclosure, junction box, control panel, or switchboard. The gland body threads through the panel hole and is locked in place with a locknut on the inside — the clamping mechanism then grips the cable and compresses the internal rubber seal against the cable outer sheath, providing both a mechanical strain relief and an environmental seal at the cable entry point.

The NCG16A is a premium nylon PA66 cable gland with EPDM rubber seal — rated IP68 and submersible to 50 metres. IP68 is the highest standard for ingress protection against water — the gland provides a watertight seal suitable for outdoor, underground, and marine installations where the enclosure may be partially or fully submerged. EPDM rubber provides excellent resistance to weathering, ozone, and UV. Nylon PA66 body is halogen free, low smoke, and UV resistant.

The NCG16A suits cables with an outer diameter of 5–10mm — suitable for a wide range of single-core and multi-core cables used in control, power, and instrumentation wiring. The full range covers M12 through M63 to suit a wide range of cable sizes and panel entry requirements.

Q: What panel hole size does the NCG16A require?
A: The NCG16A requires a 16mm panel hole — M16 thread.

Q: What cable diameter does the NCG16A suit?
A: The NCG16A suits cables with an outer diameter of 5mm to 10mm.

Q: What is the IP rating of the NCG16A?
A: The NCG16A is rated IP68 — submersible to 50 metres.

Q: Is the NCG16A halogen free?
A: Yes — the NCG16A is made from Nylon PA66 with halogen free, low smoke properties. It complies with RoHS and REACH.

Q: Is the NCG16A sold individually or in a pack?
A: The NCG16A is sold individually.