NCG40A M40 Nylon Cable Gland IP68 Black — 23-31.8mm Cable

Description

NCG40A. M40. Nylon Cable Gland. IP68. Black. 23–31.8mm Cable Range. Submersible to 50m.

The NCG40A is an M40 premium nylon cable gland — used to seal cables entering enclosures, junction boxes, and panels through a 40mm hole. Cable range 23–31.8mm. IP68 rated — submersible to 50 metres. Nylon PA66 body with EPDM rubber seal. Halogen free, low smoke, UV resistant. Compliant with RoHS, CE, IEC, REACH, and IEC 60529. Sold individually.

• NCG40A — M40 Nylon Cable Gland, Black, IP68
• Thread size: M40 × 1.5mm pitch
• Panel hole size: 40mm
• Cable range: 23–31.8mm outer diameter
• Thread length: 20mm
• Locknut included — point to point: 53.8mm, flat to flat: 49.5mm
• Body material: Nylon PA66 — halogen free, low smoke, UV resistant
• Seal material: EPDM rubber
• Colour: Black
• IP rating: IP68 — submersible to 50 metres
• Operating temperature: -40°C to +105°C
• Compliance: RoHS, CE, IEC, REACH, IEC 60529
• Suits enclosures, junction boxes, control panels, switchboards
• Sold individually

Buy online now — fast dispatch Australia-wide.

About Premium Nylon Cable Glands

A cable gland (also called a cable fitting or cable connector) is a threaded fitting used to secure and seal a cable as it enters an enclosure, junction box, control panel, or switchboard. The gland body threads through the panel hole and is locked in place with a locknut on the inside — the clamping mechanism then grips the cable and compresses the internal rubber seal against the cable outer sheath, providing both a mechanical strain relief and an environmental seal at the cable entry point.

The NCG40A is a premium nylon PA66 cable gland with EPDM rubber seal — rated IP68 and submersible to 50 metres. IP68 is the highest standard for ingress protection against water — the gland provides a watertight seal suitable for outdoor, underground, and marine installations where the enclosure may be partially or fully submerged. EPDM rubber provides excellent resistance to weathering, ozone, and UV. Nylon PA66 body is halogen free, low smoke, and UV resistant.

The NCG40A suits cables with an outer diameter of 23–31.8mm — suitable for large multi-core armoured and unarmoured cables used in heavy power distribution, industrial control, and infrastructure wiring. The full range covers M12 through M63 to suit a wide range of cable sizes and panel entry requirements.

Q: What panel hole size does the NCG40A require?
A: The NCG40A requires a 40mm panel hole — M40 thread.

Q: What cable diameter does the NCG40A suit?
A: The NCG40A suits cables with an outer diameter of 23mm to 31.8mm.

Q: What is the IP rating of the NCG40A?
A: The NCG40A is rated IP68 — submersible to 50 metres.

Q: Is the NCG40A halogen free?
A: Yes — the NCG40A is made from Nylon PA66 with halogen free, low smoke properties. It complies with RoHS and REACH.

Q: Is the NCG40A sold individually or in a pack?
A: The NCG40A is sold individually.