Clipsal 238-WE Mounting Box | 1 Gang Surface Mount, 20mm End Conduit Entries

Description

The surface box that gets a switch onto a solid wall.

The Clipsal 238-WE is a 1 gang surface-mount mounting box in White Electric, with two 20mm end entries for conduit. It provides a totally enclosed housing for a power point or switch where there is no cavity to recess into.

Key Features

• 1 gang surface-mount mounting box – totally enclosed
• Two 20mm conduit entries at the ends
• Rectangular plastic construction, 114mm W x 73mm H x 37mm D
• White Electric finish to match standard Clipsal wall plates
• 18-month manufacturer warranty

Grab a few while stock lasts.

Why it Matters

When You Cannot Cut Into the Wall
Brick, concrete, tile, and solid masonry leave nowhere to recess a flush box. A surface-mount box sits proud of the wall and gives the switch or outlet a solid, enclosed housing without chasing into the substrate – the standard answer in garages, workshops, laundries, and older solid-wall construction.

Conduit In, Conduit Out
The two 20mm end entries take standard conduit from either side, so the box drops into a surface run without adapters or improvised entries. Totally enclosed means the wiring stays protected once the plate is on.

Is this a flush box or a surface box?
It is a surface-mount box. It fixes to the face of the wall rather than being recessed into a cavity, so it suits solid walls where a flush box cannot be used.

What size are the conduit entries?
There are two 20mm entries, located at the ends of the box.

How many gangs does it take?
It is a 1 gang box, sized for a standard single wall plate.