GEN3 SCR332 3 Pin 32A Round Pin Fixed Surface Socket Outlet IP66

Description

A round-pin 32A weatherproof socket for high-current dedicated circuits.

The GEN3 SCR332 is a 3-pin, 32A fixed surface socket outlet with round pins, rated 250V and IP66, built for outdoor, industrial and wash-down environments. The round-pin configuration suits dedicated or specific-appliance circuits, where a standard flat plug should not fit, providing deliberate keying between circuits. At 32A, it serves higher-current single-phase supply points. As a fixed (non-switched) outlet, it is live whenever its circuit is energised. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it stands up to dust, water and demanding sites.

Key Features

• 3-pin, 32A fixed surface socket outlet, 250V
• Round pin configuration – suits dedicated high-current circuits
• Fixed (non-switched) – live whenever the circuit is on
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Series 56 style
• Surface mount
• Body approximately 109 × 101 × 101mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Operating temperature −25°C to +70°C
• Australian/NZ approval or compliance certificates held

Get yours online for fast dispatch across Australia.

Why Round Pins

Round-pin sockets are used where circuits need to be kept separate, for example dedicated supplies or specific equipment, so that a standard flat-pin plug cannot be connected by mistake. The SCR332's 3 round pins provide this keying at 32A, suiting higher-current installations where a deliberate plug-and-socket match is required.

Fixed vs Switched

The SCR332 is a fixed socket: it has no switch, so the outlet is live whenever its circuit is energised, with isolation handled upstream or elsewhere. This keeps the outlet simple and robust for dedicated high-current supply points.

Built for the Outdoors

Rated IP66, the SCR332 is dust-tight and withstands high-pressure water jets, and operates across a −25°C to +70°C range. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: Why does the GEN3 SCR332 have round pins?
A: Round pins key the socket to matching round-pin plugs, keeping dedicated or specific-appliance circuits separate so a standard flat-pin plug cannot be connected by mistake.

Q: What is the difference between the SCR332 and the SCR320?
A: The current rating. The SCR332 is 32A and the SCR320 is 20A. Both are 3-pin round-pin fixed IP66 surface sockets.

Q: Is the SCR332 switched?
A: No. It is a fixed socket outlet with no switch, so it is live whenever its circuit is energised.