GEN3 SCO3P32 32 Amp 3 Pin Round Socket 56 Series Style IP66

Description

Single-phase industrial socket, sealed to IP66.

The GEN3 SCO3P32 is a 32A single-phase industrial extension socket with three round pins and an IP66 weatherproof body. With a cable gland for quick termination, it's the rugged female end for building or repairing a high-current round-pin 32A lead.

Key Features

• 32A single phase, 3 round pins
• 250V AC
• IP66 rated — dust-tight and protected against powerful water jets
• Cable gland for quick termination (rewireable)
• 56 Series-style, interchangeable with other major brands
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Accepts 32A 3-pin round single-phase plugs

Reserve yours online for prompt Australia-wide dispatch.

The Female End of the Lead

The SCO3P32 is the trailing socket that pairs with the GEN3 round-pin 32A plugs to make a complete extension lead — the straight PLSR332 or the angled PLAR332. It follows the 56 Series-style format, so it accepts 32A single-phase round-pin plugs in a rugged IP66 weatherproof housing.

Built for Tough Australian Sites

IP66 protection means it is dust-tight and withstands powerful water jets from any direction. A virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper (for lower heat rise) stand up to vibration, moisture and a wide -25°C to +70°C operating range. It is built to AS/NZS 3123:2005, the Australian standard for industrial plugs and socket-outlets.

Quick to Wire and Replace

A cable gland makes termination fast and secure, so it's a straightforward rewireable replacement socket for a damaged or worn 32A lead. It is interchangeable with other major brands and pairs with the matching GEN3 round-pin plug and appliance inlet to build or repair a complete lead.

Q: What plug does the GEN3 SCO3P32 accept?
A: It accepts 32A single-phase 3-pin round plugs, including the matching GEN3 PLSR332 (straight) and PLAR332 (angled), in a rugged IP66 weatherproof housing.

Q: Is the GEN3 SCO3P32 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, and it is built to AS/NZS 3123:2005 for industrial use.

Q: Can the GEN3 SCO3P32 be rewired?
A: Yes. It is a rewireable extension socket with a cable gland for quick, secure termination, and should be wired by a licensed electrician.