Tesla TPSC12 12mm Cable Clips 2.5mm Twin & Earth — Pack of 500

Description

Tesla TPSC12. 12mm Flat TPS Cable Clips with Hardened Drive Nails. White. Jar of 500.

The Tesla TPSC12 is a 12mm white moulded flat cable clip with a hardened drive nail — designed to fix 2.5mm² flat TPS (Twin and Earth) cable to timber framing, wall studs, and similar substrates. The hardened nail is integral to the clip — no separate fastener required. Sold in a jar of 500 clips.

• Tesla TPSC12 — 12mm Flat TPS Cable Clip
• Suits 2.5mm² flat TPS (Twin and Earth) cable
• Hardened drive nail — integral to clip, no separate fastener needed
• White moulded plastic
• Flat cable clip profile — for flat TPS cable runs
• 500 clips per jar
• Also available in 5000 clip tub (TPSC12 Tub)

Shop online now — fast dispatch Australia-wide.

About the Tesla TPSC12 Cable Clip

TPS cable clips are the standard fixing method for running flat Twin and Earth cable along timber framing, wall plates, ceiling joists, and floor bearers in residential and commercial electrical installations. The clip's saddle profile holds the flat cable firmly against the substrate while the drive nail — hardened for reliable hammer installation — fixes through the clip base into the timber in a single action. The Tesla TPSC12 is sized for 2.5mm² T&E cable, which is the standard size used for power circuits in Australian residential wiring — ring mains, power points, and general purpose outlets.

The 12mm clip size is matched to the outer width of 2.5mm² flat TPS cable. Using the correctly sized clip ensures the cable sits firmly in the saddle without being pinched or left loose — a pinched cable can damage the insulation, while an oversized clip allows movement that can chafe the sheath over time. The TPSC12's 12mm saddle holds 2.5mm² T&E snugly, keeping the cable run straight, neat, and compliant with the fixing frequency requirements of AS/NZS 3000.

The Tesla TPSC range covers three clip sizes — 10mm for 1.5mm² T&E (TPSC10), 12mm for 2.5mm² T&E (TPSC12), and 14mm for 4.0mm² and 6mm² T&E (TPSC14). The 10mm and 12mm sizes are available in jars of 500 for standard installations and in tubs of 5000 for high-volume site use.

Q: What is the difference between the TPSC10 and TPSC12?
A: The clip size refers to the internal width of the saddle. The TPSC10 (10mm) suits 1.5mm² flat TPS cable used in lighting circuits. The TPSC12 (12mm) suits the wider 2.5mm² flat TPS cable used in power circuits. Always match the clip size to the cable being fixed — the wrong size clip can damage the cable or allow movement in the run.

Q: How are the clips installed?
A: Each clip has an integral hardened drive nail. Place the clip over the cable against the substrate and drive the nail with a hammer — the nail fixes through the clip base into the timber in one action. No pre-drilling or separate fastener is required for standard timber substrates.

Q: How many clips come in a jar?
A: This product (TPSC12) contains 500 clips per jar. A 5000 clip tub is also available for higher volume site requirements.

Warranty

This product is backed by an extended manufacturer warranty - click here for details.