QFP1-6CS 6.4mm Piggy Back Quick Connect Red — Pack of 25

Description

QFP1-6CS. 6.4mm Piggy Back Quick Connect Terminal. Red. 0.5–1.5mm². 10A. 630V. Pack of 25.

The QFP1-6CS is a 6.4mm piggy back quick connect terminal — used to crimp onto 0.5–1.5mm² conductors, connect onto a 6.4mm male blade, and allow a second female quick connect to stack on top for dual-circuit connections from a single terminal point. Brass contact with PVC insulation. Red insulated collar. 10A current rating. 630V rated. Conforms to RoHS. Pack of 25.

• QFP1-6CS — 6.4mm Piggy Back Quick Connect Terminal, Red
• Wire size: 0.5–1.5mm² (22–16 AWG)
• Current rating: 10A
• Nema tab: 0.8 × 6.35mm — suits 6.4mm male quick connect blade
• Total length (L): 21mm
• Height (H): 10.5mm
• Barrel I.D. (Ød): 1.8mm
• Barrel O.D. (ØD): 4mm
• Colour: Red — standard 0.5–1.5mm² colour code
• Contact material: Brass
• Insulation: PVC
• Voltage rating: 630V
• Operating temperature: -20°C to +105°C
• Compliance: RoHS
• Applied with standard ratchet crimping tool
• Pack of 25

Order online now — fast dispatch Australia-wide.

About Piggy Back Quick Connect Terminals

A piggy back quick connect terminal (also called a piggy back spade terminal or double female quick connect) combines a female quick connect receptacle with a male blade tab on the top — allowing two circuits to share a single terminal point on a component. The crimped wire connects into the barrel, the female receptacle slides onto the component's male blade, and a second female quick connect terminal can then be pushed onto the exposed blade tab on top — creating a stacked or "piggy back" connection from a single male blade.

This is commonly used in automotive and marine wiring where multiple accessories need to share a single fuse output, relay terminal, or switch connection — without requiring an additional junction or distribution point. Red is the standard colour code for 0.5–1.5mm² terminals. The QFP1-6CS suits 6.4mm male blades — the most common quick connect tab size used in automotive and marine wiring. Supplied by Pacific Components and conforms to RoHS.

Q: What wire size does the QFP1-6CS suit?
A: The QFP1-6CS suits 0.5–1.5mm² conductors (22–16 AWG).

Q: What blade size does the QFP1-6CS suit?
A: The QFP1-6CS suits 6.4mm male quick connect blades — the standard size used in automotive, marine, and general electrical wiring.

Q: How does a piggy back terminal work?
A: The crimped wire connects into the barrel. The female receptacle slides onto the component's male blade. A second female terminal can then push onto the exposed blade tab on top — allowing two circuits from one blade connection point.

Q: What is the current rating of the QFP1-6CS?
A: The QFP1-6CS is rated at 10A.

Q: How many terminals are in a pack?
A: The QFP1-6CS is sold in a pack of 25 terminals.