TBA28B 27.8mm Self Adhesive Cable Tie Mount Base Black 3M — Pack of 100

Description

TBA28B. 27.8×27.8mm. Self Adhesive Cable Tie Mount Base. Black. 3M Adhesive. Pack of 100.

The TBA28B is a 27.8×27.8mm self-adhesive cable tie mounting base — used to anchor cable ties to surfaces without drilling or screwing. Black Nylon 66. 3M 1600T-10 foam adhesive backing. Bi-directional slot accepts cable ties in two directions. Suits cable ties up to 4.8mm wide. Indoor and outdoor use. Halogen free. Conforms to RoHS. Pack of 100.

• TBA28B — Self Adhesive Cable Tie Mount Base, Black
• Dimensions: 27.8mm (L) × 27.8mm (W) × 6.5mm (H)
• Adhesive: 3M 1600T-10 foam adhesive backing — peel and stick
• Bi-directional slot — accepts cable ties in two directions
• Maximum cable tie width: 4.8mm
• Hole mount: 5.3mm — can also be screw-mounted
• Material: Nylon 66 — halogen free
• Colour: Black
• Flame rating: UL 94-V2
• Usage: Indoor and outdoor
• Compliance: RoHS
• Suits flat, clean surfaces — panels, enclosures, walls, chassis
• Pack of 100

Order online now — fast dispatch Australia-wide.

About Self Adhesive Cable Tie Mount Bases

A cable tie mounting base (also called a tie mount, cable tie saddle, or adhesive cable tie base) provides a fixed anchor point on any flat surface for a cable tie — allowing cables, wires, and harnesses to be routed and secured without drilling holes or using screws. The 3M 1600T-10 foam adhesive backing provides strong, durable adhesion to metal, plastic, and painted surfaces for both indoor and outdoor applications.

The TBA28B bi-directional slot accepts the tail of a standard cable tie inserted from either direction — providing flexibility in routing and allowing the cable tie to be oriented vertically or horizontally relative to the base. The 5.3mm hole mount also allows screw-down installation for applications where adhesive alone is not sufficient, or where the surface is not suitable for adhesive bonding.

Surface preparation is important for adhesive-backed mounts — the mounting surface should be clean, dry, and free of oils, dust, and loose coatings before application. Firm pressure should be applied after placement and the bond allowed to cure before load is applied.

Q: What cable tie width does the TBA28B accept?
A: The TBA28B accepts cable ties up to 4.8mm wide.

Q: What adhesive does the TBA28B use?
A: The TBA28B uses 3M 1600T-10 foam adhesive backing — a premium industrial adhesive suited to indoor and outdoor applications.

Q: Can the TBA28B be screw-mounted instead of adhesive?
A: Yes — the TBA28B has a 5.3mm mounting hole that accepts a screw for applications where adhesive-only mounting is not suitable.

Q: Is the TBA28B suitable for outdoor use?
A: Yes — the TBA28B is rated for indoor and outdoor use with 3M foam adhesive backing.

Q: How many bases are in a pack?
A: The TBA28B is sold in a pack of 100 bases.