SBN08 8mm Snap Bushing Nylon 66 Low Smoke — Pack of 100

Description

SBN08. 8mm Hole. Snap Bushing. Nylon 66. Low Smoke. Halogen Free. Pack of 100.

The SBN08 is an 8mm snap bushing — snaps into a 7.8mm chassis hole to protect cables, wires, and conduit from the sharp edges of the hole. Nylon 66 construction. Low smoke, halogen free. Conforms to RoHS. Pack of 100.

• SBN08 — Snap Bushing, 7.8mm mounting hole
• Mounting hole: 7.8mm
• Inner diameter: 5.8mm — cable/wire passage opening
• Outer diameter: 10.5mm — flange outer edge
• Total height: 8mm
• Flange height: 1.6mm
• Maximum chassis thickness: 1.6mm
• Snap fit — no tools required, installs by hand into panel hole
• Material: Nylon 66 — halogen free, low smoke
• Flame rating: 94V-2
• Compliance: RoHS
• Protects cable insulation from chassis hole sharp edges — automotive, caravan, marine, electrical, industrial
• Pack of 100

Order online now — fast dispatch Australia-wide.

About Snap Bushings

A snap bushing (also called a snap bush, cable grommet, or panel bushing) is a one-piece nylon fitting that snaps into a drilled or punched hole in a chassis, panel, or enclosure wall — providing a smooth, rounded passage for cables, wires, and conduit to pass through without contact with the sharp metal edges of the hole. Without a bushing, cable insulation is at risk of abrasion damage from sharp hole edges, which can lead to insulation failure, short circuits, and electrical faults over time — particularly in vibrating environments such as vehicles and machinery.

Snap bushings install without tools — the bushing is pushed into the hole by hand and the flexible flange snaps over the panel edge to hold the bushing in place. The inner diameter determines the maximum cable bundle or conduit that can pass through; the mounting hole dimension determines the chassis hole size required. Maximum chassis thickness must be within the specified limit for the bushing to snap and retain correctly.

The SBN08 is the smallest bushing in the Pacific Components snap bushing range — suited to small panel holes and light duty cable protection applications. It is constructed from Nylon 66 with low smoke and halogen free properties, and conforms to RoHS.

Q: What hole size does the SBN08 fit?
A: The SBN08 fits a 7.8mm chassis hole.

Q: What is the maximum cable or conduit that passes through the SBN08?
A: The SBN08 has a 5.8mm inner diameter — this is the maximum cable bundle or conduit outer diameter that can pass through the bushing.

Q: What is the maximum chassis thickness for the SBN08?
A: The SBN08 suits chassis panels up to 1.6mm thick.

Q: Does the SBN08 require tools to install?
A: No — the SBN08 snaps into the chassis hole by hand. No tools required.

Q: How many bushings are in a pack?
A: The SBN08 is sold in a pack of 100 bushings.