Clipsal 56AI450-GY Appliance Inlet 500V 50A 4 Pin 3 Phase Angled IP66 Grey

Description

A heavy-duty angled three-phase IP66 inlet for 500V industrial equipment.

The Clipsal 56AI450-GY is a 500V 50A three-phase appliance inlet from the rugged 56 Series, in grey. Its four round pins carry three phases plus earth, and the angled body provides a secure, weatherproof point to feed three-phase power into high-current industrial machinery. Built to Australian standards for demanding outdoor and industrial use.

Key Features

• 500V, 50A three-phase appliance inlet
• Four round pins – three phases plus earth (3P + E)
• Angled body design
• IP66 rated – dust-tight and protected against powerful water jets
• Surface mount
• Brass screw terminals accepting 10–16mm² rigid or stranded cable
• Polycarbonate cover, durable plastic body
• Made to AS/NZS 60320.1, IP66 to AS 60529
• Wide operating range: -25 to 75°C
• Grey finish (RAL 7035)

Order yours online now.

Why it Matters

Three-Phase, Not Single-Phase
This inlet carries three phases plus earth (3P + E) at 500V – a different configuration from the single-phase 250V inlets in the range. It's designed for three-phase machinery and equipment, and the four-pin arrangement will not accept a single-phase plug. Confirm your equipment is three-phase before ordering.

Angled Body
Unlike the straight inlets in the range, this unit has an angled body – changing how the plug and lead sit once connected. Worth checking against your mounting position and cable route before ordering.

50A with Heavy-Gauge Terminals
The 50A rating handles substantially heavier three-phase loads than the 10A, 20A, and 32A inlets, with brass screw terminals accepting 10 to 16mm² cable – matching the conductor sizes required for 50A three-phase circuits.

What is the Clipsal 56AI450-GY?
It is a 500V 50A IP66 three-phase appliance inlet with four round pins and an angled body, used to feed three-phase power into high-current industrial equipment.

Is this single-phase or three-phase?
Three-phase. The four pins carry three phases plus earth (3P + E), so it suits three-phase equipment only.

What cable does it take?
The brass screw terminals accept 10 to 16mm² rigid or stranded cable, sized for 50A three-phase circuits.