GEN3 MCB6-106 6A Single Pole C-Curve MCB Circuit Breaker 6kA

Description

Reliable overload protection in one module.

The GEN3 MCB6-106 is a 6-amp single-pole miniature circuit breaker with a C-curve tripping characteristic and 6kA breaking capacity. It mounts on standard DIN rail in a single module width, protecting final subcircuits from overload and short-circuit faults in domestic, commercial and light industrial switchboards.

Key Features

• 6A rated current, single pole
• C-curve tripping characteristic (suits general lighting and mixed loads)
• 6kA short-circuit breaking capacity
• Single-module DIN-rail mounting (18mm width)
• Clear ON/OFF toggle with trip indication
• Australian/NZ approval or compliance certificates held
• Interchangeable with other major brands

Add to cart for fast dispatch across Australia.

What the C-Curve and 6kA Mean

A C-curve breaker trips on sustained overloads and tolerates the brief inrush of typical mixed circuits, making it the common choice for general lighting, power and small motor loads. The 6kA breaking capacity is the maximum fault current the device can safely interrupt, which suits most domestic and light commercial switchboards fed from the distribution network.

Single-Module Convenience

At a single module wide, the MCB6-106 fits standard DIN rail in any compatible load centre or switchboard, so an electrician can build up a board with the right mix of ratings. As a GEN3 product it is covered by Australian/NZ approval or compliance certificates and is interchangeable with other major brands.

Q: What does the C-curve rating on the GEN3 MCB6-106 mean?
A: A C-curve breaker trips between five and ten times its rated current on short-circuit, tolerating normal inrush while protecting against sustained overloads. It suits general lighting, power and mixed loads.

Q: What does 6kA breaking capacity mean?
A: It is the maximum prospective short-circuit current the breaker can safely interrupt without damage, namely 6,000 amps. This is suitable for most domestic and light commercial installations.

Q: How much space does the MCB6-106 take in a switchboard?
A: It is a single-module device, approximately 18mm wide, and mounts on standard DIN rail in any compatible load centre or switchboard.