GEN3 SCO5P10 10 Amp 5 Pin Round Socket 56 Series Style IP66

Description

Three-phase industrial socket, sealed to IP66.

The GEN3 SCO5P10 is a 10A three-phase industrial extension socket with five round pins and an IP66 weatherproof body. With a cable gland for quick termination, it's the rugged female end for building or repairing a round-pin three-phase 10A lead that carries a neutral.

Key Features

• 10A three phase, 5 round pins (three actives, neutral, earth)
• 500V AC
• IP66 rated — dust-tight and protected against powerful water jets
• Cable gland for quick termination (rewireable)
• 56 Series-style, interchangeable with other major brands
• PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components (greater than 85% copper) for lower heat rise
• Operating temperature -25°C to +70°C
• Accepts 10A 5-pin round three-phase plugs

Add one to your cart for fast Australia-wide dispatch.

The Female End of the Lead

The SCO5P10 is the trailing socket that pairs with the GEN3 five-pin 10A plugs to make a complete three-phase extension lead — the straight PLS3PH510 or the angled PLA3PH510. It follows the 56 Series-style format, so it accepts 10A five-pin three-phase round plugs in a rugged IP66 weatherproof housing.

Five-Pin Three-Phase, Built Tough

The five-pin configuration carries three-phase power with a neutral (three actives, neutral and earth) rated to 500V, suiting three-phase equipment that also needs a neutral connection. IP66 protection means it is dust-tight and withstands powerful water jets from any direction, with a virgin-grade PCA18 body, 316 stainless steel springs and screws, and brass contacts of greater than 85% copper for lower heat rise. A wide -25°C to +70°C operating range and AS/NZS 3123:2005 compliance suit it to demanding Australian industrial sites.

Quick to Wire and Replace

A cable gland makes termination fast and secure, so it's a straightforward rewireable replacement socket for a damaged or worn 10A three-phase lead. It is interchangeable with other major brands and pairs with the matching GEN3 five-pin plug and appliance inlet to build or repair a complete lead.

Q: What plug does the GEN3 SCO5P10 accept?
A: It accepts 10A three-phase 5-pin round plugs, including the matching GEN3 PLS3PH510 (straight) and PLA3PH510 (angled), in a rugged IP66 weatherproof housing.

Q: How is the GEN3 SCO5P10 wired?
A: As a five-pin three-phase socket it connects three actives, a neutral and an earth, rated 10A at 500V, for three-phase circuits that require a neutral.

Q: Is the GEN3 SCO5P10 weatherproof?
A: Yes. It is IP66 rated, meaning it is dust-tight and protected against powerful water jets, and it is built to AS/NZS 3123:2005 for industrial use.