Transco ENC06 6 Way DIN Rail Enclosure MCB RCD RCBO IP30

Description

6 Way DIN Rail Enclosure. Mid-Size. Circuit Protection Ready.

The Transco ENC06 is a 6 way DIN rail enclosure — housing for up to six DIN rail mounted circuit protection devices including circuit breakers, RCDs, and RCBOs. Rated up to 63A at 240/415V AC, with a UV and fire resistant ABS body. A mid-size six-position solution for small sub-board applications where more circuit positions are needed than a 4 way enclosure provides, without stepping up to a full 8 or 12 way board. Sold as enclosure only — devices sold separately.

• Transco — 6 way DIN rail enclosure for circuit breakers, RCDs, RCBOs
• UV and fire resistant ABS construction
• 6 DIN rail module capacity
• Suits MCBs, RCBOs, RCDs, and standard DIN rail mounted devices
• Rated up to 63A at 240/415V AC, 50/60Hz
• IP30 ingress protection
• Dimensions: L123 mm x W130 mm x H60 mm
• Standard: IEC60439-3
• Also available in 1, 2, 4, 8, 12, and 18 way configurations
• Enclosure only — devices sold separately

Order online now for fast dispatch Australia-wide.

Where the ENC06 Fits — Six Position Sub-Board and Circuit Protection

The ENC06 provides six DIN rail module positions in a L123mm enclosure — the right specification for a small dedicated sub-board where a main switch plus up to five circuit breakers or RCBOs are needed, or any other six-module combination of standard DIN rail protection devices. Six positions is a practical capacity for a small apartment sub-board, a dedicated lighting and power circuit group, or a secondary distribution point in a commercial installation where a compact enclosure is preferred over a full switchboard.

The UV and fire resistant ABS body provides the structural integrity and material safety required for electrical enclosures housing live circuit protection devices. The IP30 rating makes the ENC06 suitable for indoor and sheltered installations. At L123mm it is compact enough for tight spaces while providing the six module positions needed for a useful range of circuit combinations. The consistent W130 x H60mm cross-section across the full ENC range means enclosure selection is straightforward — choose the length that matches the module count required.

The ENC06 is the 6 way option in the Transco enclosure range — between the 4 way ENC04 and the 8 way ENC08. The same enclosure is available in 1 way (ENC01), 2 way (ENC02), 4 way (ENC04), 8 way (ENC08), 12 way (ENC12), and 18 way (ENC18). All variants share the same 130mm width, 60mm height, UV and fire resistant ABS construction, and IEC60439-3 standard compliance. Sold as enclosure only.

Q: What devices are compatible with the Transco ENC06 enclosure?
A: The ENC06 accommodates any standard DIN rail mounted devices up to 6 module widths total — including MCBs, RCBOs, RCDs, and main switches. Devices are sold separately. Confirm the module width of each device before ordering to ensure the total does not exceed 6 modules.

Q: What is a typical configuration for the Transco ENC06?
A: A common 6 module configuration is a 2-module main switch plus four 1-module MCBs or RCBOs — providing a complete small sub-board for up to four circuits with a dedicated isolation switch. Other combinations include a double pole RCBO plus four single pole MCBs, or any mix of standard DIN rail protection devices totalling 6 modules.

Q: Is the Transco ENC06 suitable for outdoor installations?
A: No. The ENC06 carries an IP30 rating — suitable for indoor and sheltered installations only. For outdoor or exposed locations, the Transco weatherproof switchboard range (SB04WP or SB12WP — IP55) is the appropriate specification.