CST10 10mm Black Split Loom Tube Polypropylene — 10m Roll

Description

CST10. 10mm. Black Split Loom Tube. Polypropylene. Corrugated. 10m Roll.

The CST10 is a 10mm black corrugated split loom tube — a longitudinally split flexible conduit used for quick, neat, and cost-effective wire harnessing and cable protection. 10mm inner diameter, 12.8mm outer diameter. Polypropylene construction. Chemical resistant to automotive oils, fluids, and solvents. Flame rating HB. FMVSS302 pass. Manufactured in Australia. Sold as a 10m roll.

• CST10 — 10mm Black Corrugated Split Loom Tube
• Inner diameter: 10mm
• Outer diameter: 12.8mm
• Length: 10m roll
• Colour: Black
• Material: Polypropylene — high impact resistance
• Split loom — longitudinal split allows cables to be inserted and removed without disconnecting
• Corrugated wall — flexible, lightweight, crush resistant
• Chemical resistance to automotive oils, fluids, and solvents
• Moderate UV stability
• Operating temperature: -20°C to 90°C continuous, 120°C peak
• Flame rating: HB
• Flammability: FMVSS302 Pass
• Manufactured in Australia
• Sold as a 10m roll

Buy online now — fast dispatch Australia-wide.

About Split Loom Tube

Split loom tube (also called split conduit, wire loom, tidy loom, or cable sleeve) is a corrugated flexible tube with a longitudinal split running the full length — allowing cables and wire harnesses to be inserted sideways into the tube without disconnecting the ends. The split closes over the cables under the natural tension of the tube wall, holding the cables neatly inside while providing protection from abrasion, chafing, heat, and environmental contamination.

Split loom is widely used in automotive, marine, caravan, industrial, and electrical wiring applications where cables need to be bundled, protected, and routed neatly — and where the ability to add or remove cables without cutting or disconnecting is important. The polypropylene material provides chemical resistance to the oils, fluids, and solvents commonly encountered in automotive and marine environments.

The CST10 suits small to medium cable bundles — stepped up from the 7mm CST7, it accommodates a bundle diameter up to 10mm I.D. It is manufactured in Australia and sold as a 10m roll. A 30m bulk roll version is also available as the CST10/30.

Q: What is the inner diameter of the CST10?
A: The CST10 has a 10mm inner diameter — the available space for cables inside the tube.

Q: How is split loom installed?
A: The split loom is flexed open along the longitudinal split and cables are pushed in sideways. No disconnecting of cable ends is required. The tube naturally closes over the cables.

Q: Is the CST10 suitable for automotive use?
A: Yes — polypropylene construction provides chemical resistance to automotive oils, fluids, and solvents. The FMVSS302 flammability pass confirms suitability for automotive wiring applications.

Q: How long is the roll?
A: The CST10 is sold as a 10m roll.