Clipsal Actassi 30RJ45SMA5C-WE RJ45 Jack Cat5e UTP 30 Mech White

Description

A Cat5e RJ45 jack in the Clipsal 30-series mechanism footprint.

The Clipsal 30RJ45SMA5C-WE is an Actassi S-110 RJ45 connector for Cat5e UTP cabling, in white. Its 30 mech footprint drops into Clipsal wall plates and mounting blocks, giving a terminated data outlet that matches the rest of the range. Rated for 1000BASE-T.

Key Features

• Cat5e RJ45 jack, Actassi S-110
• UTP unshielded, 1000BASE-T rated
• 30 mech footprint – suits Clipsal wall plates and mounting blocks
• Two piece design
• Insulation displacement contact (IDC) termination
• TIA-568A/B colour code
• 8 gold-plated copper alloy pins to IEC 60603-7
• Accepts AWG 24 to AWG 23 conductors, 0.9–1.4mm cable
• Transmission frequency 1–100 MHz
• 750 mating cycles
• UL listed, UL94-V0 flame retardance
• 18 month warranty

Contact us to check availability.

Why it Matters

Fits the Clipsal Plate System
The 30 mech footprint is the standard Clipsal mechanism size, so this jack mounts into the same plates and blocks as switches, sockets, and other 30-series mechanisms – letting a data outlet sit alongside power on a shared plate.

Terminates Either Standard
The IDC contacts carry TIA-568A/B colour coding, so the jack can be punched down to either wiring standard using a punch down or quick termination tool.

Built to the Standards
Manufactured to ANSI/TIA-568-C.2, IEC 60603-7-2, ISO/IEC 11801, and AS/NZS 3080, and UL listed – with gold-plated contacts rated for 750 mating cycles.

Discontinued Line
Clipsal has discontinued this connector and it cannot be resupplied. If you need the 30 mech format for an existing Clipsal plate installation, check current availability before specifying it.

What is the Clipsal 30RJ45SMA5C-WE?
It is an Actassi S-110 Cat5e RJ45 jack in the Clipsal 30 mech footprint, for terminating UTP data cable into a wall plate.

What cable does it take?
UTP cable with AWG 24 to AWG 23 conductors and an outer diameter of 0.9 to 1.4mm.

Will it fit my Clipsal plate?
It uses the 30 mech footprint, the standard Clipsal mechanism size. Note this is different from the keystone format, which will not fit a 30-series plate.