GEN3 SC410 4 Pin 10A 500V Three Phase Fixed Surface Socket Outlet IP66

Description

A three-phase round-pin weatherproof socket for industrial use.

The GEN3 SC410 is a 4-pin, 10A fixed surface socket outlet with round pins, rated 500V three-phase and IP66, built for outdoor, industrial and wash-down environments. The four round pins carry three phases plus earth, providing a keyed three-phase connection point for industrial equipment, and a standard single-phase flat plug cannot be connected. As a fixed (non-switched) outlet, it is live whenever its circuit is energised. Moulded in the Series 56 style from durable PCA18 virgin-grade plastic, it stands up to dust, water and demanding sites.

Key Features

• 4-pin, 10A fixed surface socket outlet
• 500V three-phase
• Round pin configuration – keyed three-phase connection
• Fixed (non-switched) – live whenever the circuit is on
• IP66 weatherproof – dust-tight and protected against high-pressure water jets
• Series 56 style
• Surface mount
• Body approximately 109 × 101 × 101mm
• Durable PCA18 virgin-grade plastic (no regrind)
• 316 stainless steel springs and screws
• Brass internal components, greater than 85% copper
• Operating temperature −25°C to +70°C
• Australian/NZ approval or compliance certificates held

Order now for fast dispatch across Australia.

Three-Phase Connection

The SC410's four round pins carry three active phases plus earth, making it a fixed connection point for three-phase equipment rated up to 500V. The round-pin keying keeps three-phase circuits separate from single-phase ones, so a standard flat-pin plug cannot be connected by mistake, an important safeguard where both supply types are present on site.

Fixed vs Switched

The SC410 is a fixed socket: it has no switch, so the outlet is live whenever its circuit is energised, with isolation handled upstream or elsewhere. This keeps the outlet simple and robust for dedicated three-phase supply points.

Built for the Outdoors

Rated IP66, the SC410 is dust-tight and withstands high-pressure water jets, and operates across a −25°C to +70°C range. Moulded from PCA18 virgin-grade plastic with 316 stainless steel springs and screws and high-copper brass internals, it is built for long service in exposed and demanding locations, and is covered by Australian/NZ approval or compliance certificates.

Q: Is the GEN3 SC410 single-phase or three-phase?
A: Three-phase. It is a 4-pin, 500V socket with four round pins carrying three phases plus earth, for three-phase equipment.

Q: Why does the SC410 have round pins?
A: Round pins key the socket to matching three-phase round-pin plugs, keeping three-phase circuits separate so a single-phase flat-pin plug cannot be connected by mistake.

Q: Is the SC410 switched?
A: No. It is a fixed socket outlet with no switch, so it is live whenever its circuit is energised.