Extension Lead 5 Pin 10 Amp Round Pin Straight Plug 2m Heavy Duty 2.5mm cable 415V

Description

Three phase power delivered safely, anywhere on site.

A 5 pin round 10 Amp extension lead connects 415V three phase equipment to a matching 10A outlet over distances of 2m to 60m, using 3 phase actives, a neutral and an earth. Every lead is assembled to order, tested and tagged before it leaves our warehouse.

High quality extension lead:

• Extension Lead 5 Pin Round 10 Amp 415V
• 24 month warranty on all products. Warranty does not extend to misuse.
• Please consult with a qualified electrician or engineer about the suitability of this product for your intended purpose.
• All Electrotraders Extension Leads are assembled, tested and tagged in-house by our Licenced Electricians.

Choose your configuration:

• Available in lengths (m): 2, 3, 5, 10, 15, 20, 25, 30, 40, 50, 60 (Note: configurations may not offer all length options due to component availability or electrical characteristics)
• Cable Specifications: cross-sectional area (CSA in mm2), Nominal Sheath Thickness (NST in mm), Max DC Resistance @20°C (MaxR in ohms/KM), Nominal Diameter (NOD in mm), Amperage rating (in accordance with AS/NZS 3008.1.1.2009 Table 14)
  • Standard: Not Available
  • Heavy Duty: CSA 2.5mm2, NST 2.1mm, MaxR 8.21, NOD 13.5mm, Amps 27
  • Extra Heavy Duty: CSA 4mm2, NST 2.2mm, MaxR 5.09, NOD 15.9mm, Amps 36
• Typically used at events & temporary cabling, fairgrounds, sporting venues, for generators / motors / compressors / construction applications including portable equipment such as concrete cutting.

IMPORTANT: Avoid extra costs and fees of ordering the wrong product. Before you order: confirm the compatibility of the plug and sockets i.e. 5 Pin 32A, 5 Pin 20A, 5 Pin 10A etc. If you aren't sure, contact us, we are happy to help.

Switch Gear:

• All Plugs and Sockets are source from high quality reputable Australian brands, are IP66 rated and are compatible with all leading Australian switch gear.
• Choose from our regular high quality GEN3 plugs and sockets, or upgrade to industry leading Clipsal gear (available on some product options only)

Cable Properties:

• Leads are assembled using Multi Core Rubber Insulated and Sheathed Flexible Power Cable insulated with Ethylene-propylene rubber (EPR) R-EP-90 90 deg C Conductor
• Conductors are Class 5 tinned copper according to AS/NZS 1125,IEC 60228
• H07 Grade Rubber Flex cable has a submersible rating of 200m (suitable for fresh water, salt water, sewage/contaminated water), is UV sunlight / oil / weather resistant and flame retardant to IEC 0332-1-2:2004,EN60332-1-2-2004.
• Outer jacket (black colour) made of Chlorinated Polyethylene, CPE rubber compound
• Rated Voltage 0.6/1kV

Order online now for fast dispatch Australia-wide.

Built for Australian conditions. The H07 grade rubber flex used in every lead is UV, oil and weather resistant, flame retardant and submersible to 200m, so it handles outdoor events, fairgrounds and sporting venues as readily as generators, motors, compressors and portable construction equipment such as concrete cutting gear. The 5 pin round plug and socket pattern is the common Australian three phase fitting, and both switch gear options are IP66 rated for dust and water jet protection.

Heavy Duty or Extra Heavy Duty? Heavy Duty 2.5mm² cable carries 27 Amps under AS/NZS 3008.1.1.2009 Table 14, comfortably above the 10 Amp rating of this lead, and suits most applications. Extra Heavy Duty 4mm² cable drops the maximum DC resistance from 8.21 to 5.09 ohms/KM, which reduces voltage drop on long runs, making it the better choice for 40m to 60m lengths or sensitive equipment.

Assembled and test tagged in Brisbane. Every lead is built in-house at our Rochedale QLD warehouse by licensed Australian electricians, individually tested, tagged and covered by a 24 month warranty. We ship Australia-wide, and local customers can click and collect. Need a custom length or a bulk order quote? Call 1300 017 197.

Q: What is a 5 pin 10 amp extension lead used for?
A: It powers 415V three phase equipment fitted with a 5 pin round 10A plug, such as small three phase motors, compressors and portable machinery, at events, fairgrounds, sporting venues and construction sites where temporary cabling is required.

Q: Should I choose Heavy Duty or Extra Heavy Duty cable?
A: Heavy Duty 2.5mm² cable is rated to 27 Amps and suits most 10 Amp applications. Extra Heavy Duty 4mm² cable has lower resistance (5.09 vs 8.21 ohms/KM), reducing voltage drop on longer runs such as 40m to 60m.

Q: Can I get this extension lead with Clipsal plugs and sockets?
A: Yes. Select Clipsal under the Switch Gear option on available configurations. Standard leads use quality GEN3 fittings, and both options are IP66 rated and compatible with leading Australian switch gear.