UBL025 2.5mm² Uninsulated Bootlace Ferrule 8mm — Pack of 100

Description

UBL025. 2.5mm². 8mm Pin. Uninsulated Bootlace Ferrule. Bare Copper. Halogen Free. Pack of 100.

The UBL025 is a 2.5mm² uninsulated bootlace pin ferrule with an 8mm pin length — used to terminate stranded conductors into screw terminal blocks, DIN rail terminals, and equipment connection points. Bare tin plated copper sleeve — no insulation collar. Halogen free. Conforms to DIN 46228/1. Pack of 100.

• UBL025 — 2.5mm² Uninsulated Bootlace Ferrule, 8mm Pin
• Wire cross-section: 2.5mm²
• Pin length: 8mm
• Bare copper — no insulation collar, low-profile fit in terminal
• Tin plated copper sleeve — corrosion resistant
• Halogen free
• Conforms to DIN 46228/1 — uninsulated ferrule standard
• Compliance: RoHS
• Suits stranded conductors — power and control wiring, automation, switchboard wiring
• Lower profile than insulated ferrules — suits space-restricted terminal blocks
• Applied with standard bootlace ferrule crimping tool
• Pack of 100

Order online now — fast dispatch Australia-wide.

About Uninsulated Bootlace Ferrules

An uninsulated bootlace ferrule (also called an uninsulated end sleeve or cord end terminal) is a bare copper sleeve crimped onto the end of a stranded conductor — serving the same purpose as an insulated ferrule but without the plastic collar. The sleeve consolidates all conductor strands into a single rigid pin that inserts cleanly and securely into a screw terminal, preventing strand splaying, strand breakage under the screw, and stray strands that can cause short circuits.

Uninsulated ferrules have a lower overall profile than insulated ferrules — the absence of the plastic collar means the ferrule body is thinner and shorter at the terminal entry point. This makes them suited to space-restricted terminal blocks where an insulated collar would not fit within the terminal opening, or to installations where colour-coded insulation is not required or where terminal manufacturers specify uninsulated ferrules.

The UBL025 conforms to DIN 46228/1 — the DIN standard for uninsulated wire end ferrules — and is supplied by Pacific Components. A standard bootlace ferrule crimping tool is required; the tool die must accommodate 2.5mm² uninsulated ferrules.

Q: What is the difference between an insulated and uninsulated bootlace ferrule?
A: An insulated ferrule (such as BL025) has a plastic colour-coded collar that provides wire size identification and conductor protection at the entry point. An uninsulated ferrule (UBL025) is a bare copper sleeve with no collar — lower profile and suited to space-restricted terminals or installations where insulation colour coding is not required.

Q: What wire size does the UBL025 suit?
A: The UBL025 suits 2.5mm² stranded conductors — power and control wire used in automation, switchboard, and industrial wiring.

Q: What tool is required to crimp the UBL025?
A: A standard bootlace ferrule ratchet crimping tool is required. The tool must have a die set that accommodates 2.5mm² uninsulated ferrules.

Q: How many ferrules are in a pack?
A: The UBL025 is sold in a pack of 100 ferrules.